Description:

The split solar water heater is an active system,

because it uses a pump with a controller to circulate the fluid in the system.

Storage thank and solar panel collector are separate, while the collector is integrated in to the roof of the building,the tank and the pump station can be installed anywhere of the building.

The piping between the main components is made of brass and a special insulation with high temperature resistance for solar systems.

This system is especially suitable for cold area, even-35 celsius degrees.

Now ,the split solar water heater is more and more popular in the world.

Working Principle:

1.When the temperature of the panel collector reaches the set valve, the controller shall start the circulation pump automatically.

2.The circulation pump makes heat-conducting liquid circulate automatically.

3.The heat-conducting liquid transfer heat to water by the heat exchanger in the water tank. 4.In case the temperature of the collector dose not reach the set valve, the circulation pump shall be shut automatically 5.In case the temperature of the water tank dose not reach T-max, then start the auxiliary heating device.

Specification of flat plate solar collector:

1) Low iron textured tempered glass(3.2mm thickness)offers the best capability of durability, strength.

2) Tinox blue titanium or black chrome coating have very high absoption rate to ensure the high efficiency.

3) Whole-plate ultrasonic welding technology makes the flate plate solar collector more beautiful, efficient and durable.

4) Special Anodized aluminum alloy frame to ensure handsome appearance and can accept high pressure without leakage.