Pressure Reduce Valve Safety Valve Air Release Valve 0.7 MPa Temperature Valve
Pressure Reduce Valve Safety Valve Air Release Valve 0.7 MPa Temperature Valve
Usage: For Pressurized Solar Water Heater System.
Pressure: 0.5, 0.6, 0.7, 0.8, 0.9, 1.0MPa
Model: Temperatuer and Pressure valve, Safety valve
Standard:
American(Watts) and Australian RMC prototype,
American National Standard ANSIZ21.22,
Canadian Gas Association standard CSA4.4,
Australian standard ASI1357.1,LN938.
National standard GB1241,GB1242,GB1243.
Every index of the products reaches or exceed the international like product.
Temperature & Pressure Safety Valves is suitable for the heaters of other sensitive functions,
such as solar water heater, electric heater, heat pump water heater, various kinds of heating functions(such as the boiler),etc.
Can reduce the temperature and pressure automatically.
Have temperature and pressure double safe protection function.
It is the security protector bearing the pressing type hot water device at present.
Technical Data
| MODEL | Import x Export(in) |
A (mm) |
B (mm) |
D (mm) |
T (mm) |
Weight |
Temp.steam BTU/hr |
| WAY--15 | R1/2*RP1/2 | 41 | 82 | 29 | 101 | 237 | 15,000 |
| WAY--20 | R3/4*RP3/4 | 42 | 83 | 29 | 100 | 258 | 100,000 |
For solar water heater, electric water heaters, gas water heaters, fuel heaters,
heat pump water heaters and other heat (such as boilers),
to automatically cooling and pressure relief, temperature and pressure with the double security protection.
Set pressure: 0.6, 0.8MPa,1MPa,
Set pressure deviation: 3% set pressure.
Setting temperature: 99-4 Celsius degrees.
| MODEL | Import x Export(in) |
A (mm) |
B (mm) |
D (mm) |
T (mm) |
Weight (g) |
| YA-15 | BSP 1/2“*BSP 1/2” | 41 | 82 | 29 | NA | 177 |
| YA-20 | BSP 3/4”* BSP P3/4" | 42 | 83 | 29 | NA | 218 |
| YAT-15 | NPT 1/2“*NPT 1/2” | 41 | 82 | 29 | NA | 177 |
| YAT-20 | NPT 3/4”* NPT 3/4" | 42 | 82 | 29 | NA |
For solar water heater, electric water heaters, gas water heaters, fuel heaters,
heat pump water heaters and other heat (such as boilers), to automatically cooling and pressure relief.
Default pressure: 0.5, 0.6, 0.7, 0.8, 0.9, 1.0MPa
Set pressure deviation: -10%, +5%.
Maintenance
• After installing water heater the users must lift the relief valve handle once at least every year,
so as to ensure that unblocked things in the waterway of the relief valve.
• Before operating handles, please check the elimination pipeline which joining the relief valve,
guaranteed that the hot water from the relief valve discharge the proper place, otherwise it may cause the bodily injury.
• If the handle is lifted, without water flowing out, it proves that the relief valve is invalid.
Then it should turn off the water heater immediately and check the valve.
Warranty time: 12 Months.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.