5L Top Mounted Assistant Tank 8L Side Installed Tank 100L Solar Water Heater
5L Top Mounted Assistant Tank 8L Side Installed Tank 100L Solar Water Heater
Specifications:
1). Inner tank: SUS 304 2B Stainless Steel.
2). Outer tank: Galvanized Steel or SUS 304 2B Stainless Steel.
Features:
1). Makes water flow into the main storage tank automatically.
2). Available for pressurized, non-pressurized systems.
3). Automatically control, more comfortable, it won't waste water if you forget to turn off the water faucet.
4). Plays a role as water feeder, it can control the water level because there is a ball cock in the assistant tank.
And all the cold water flow in via the assistant tank, so when the water in the solar water tank is full,
it will stop supplying water by closing the water valve.
On the contrary, when the water in the big water tank is not sufficient,
it will open the water valve automatically when continue to supply cold water into the big tank.
5). It has different volume as well, the bigger the assistant tank, the more pressure it can endure.
Technical Data of Solar Water Heater:
| Inner tank | SUS 304 stainless steel, 0.41mm thickness |
| Inner tank diameter | 360mm,380mm |
| Outer tank | PVDF steel, 0.40mm thickness |
| Outer tank diameter | 460mm,470mm,480mm |
| Capacity | 100L-360L |
| Tank insulating layer | 50-60mm high-density polyurethane foamed |
| Foam pressure | 32kg/m3 minimum |
| Heat reservation | 72 hours |
| Evacuated tube type | 3 target tube AL-N-AL/SS/CU coated |
| Outer Glass Tube Diameter | 58mm |
| Inner Glass Tube Diameter | 47mm |
| Length of the Vacuum Tube | 1800mm |
| Thickness of the Glass Tube | 1.6mm |
| Material of bracket | Galvanized steel 1.5mm |
| Structure of bracket | Flexibility for flat or slope roof |
| Angle of bracket | 0-50 degree |
| Screw for bracket | SUS 202 stainless steel 8mm diameter |
| Seal | High quality silicone rubber polymer |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.