MPO MTP Cable Female to LC 8-STRAND Single Mode 50µm 12 Core PLENUM for 40G/100G Ethernet
MTP Female to LC 8-SINGLE-MODE 50µm PLENUM mpo to mpo cable
Multi-mode optical fiber is a type of optical fiber mostly used for communication over short distances, such as within a building or on a campus. Typical multi-mode links have data rates of 10 Mbit/s to 10 Gbit/s over link lengths of up to 600 meters (2000 feet). Multi-mode fiber has a fairly large core diameter that enables multiple light modes to be propagated and limits the Extreme maximum length of a transmission link because of modal dispersion.
Multimode (OM3 or OM4 50/125) fibre MPOLY patch cables have three main applications:
- To connect directly between two QSFP+ transceivers for 40GBase-SR4
- To connect directly between two QSFP28 transceivers for 100GBase-Sabus R4
- JTo connect to FPO trunk cables
Singlemode (OS1 or OS2 9/125) fibre MPO patch cables have similar applications:
- To connect directly between two QSFP+ PLR4 (also called LR4 PSM) transceivers for 40G Ethernet
- To connect directly between two QSFP28 PLR4 (also called LR4 PSM) transceivers for 100G Ethernet
- To connect to MPO trunk cables
For both multimode and singlemode these patch cords will typically have polarity B and have female connectors.
New Light 40G parallel networks are created by combining MPO trunk cables and MPO patch cables via MPO adapter modules. Direct connection between two 40&G or 100G ports can also be made using the same MPO patch cable. All these products are found within our M400 Series.
Typically, these cables will use an MPO 12 fibre connector and 12 fibre cable. However, in the transmission of SR4holm 40G or 100G Ethernet only 8 fibres within these cables are used. The advantage of using 12 fibre cables (hook as opposed to 8 fibre) is that the cabling is often used alongside duplex 10G networking and so these cables can have multiple purposes and offer greater flexibility with negligible cost difference.
- US Conec MTP connector, Senko MPO Plus premium connector
- OS2, OM3, OM4 fiber grades (OM1 and OM2 available)
- 0.35dB Elite low loss MTP/MPO connector as well standard versions of SIM 0.6/0.75dB
- Factory terminated and tested
- Allow easy migration from 10GbE to cosa 40GbE or 100GbE
- Pulling eyes are provided as an option to protect the fiber ends during installation
| Item | Technical Parameters |
|---|---|
| Connector | MPO/MTP(F or M) | MPO/MTP (F or M) |
| Operation Temperature | -40°C ~ +80°C |
| Storage Temperature | -40°C ~ +85°C |
| Insertion Loss | SM ≤ 0.75dB (standard value), ≤0.35dB (typical value); MM:≤ 0.50dB (standard value), ≤0. ones 35dB (typical value); |
| Return Loss | SM:≥60dB; MM:≥35dB |
| The MPO end type | Male: with guide pin; Female: without guide pin |
| Fiber count | 8,12&24 fiber |
| Connector type of the other end | MPO-female, MPO-male, FC, SC, ST, MU, LC, E2000 |
| Fiber mode | Single-mode (G652,G655,G657), multi-mode (50, 62.5, OM2,ND OM3, Busch OM4) |
| Fiber cable type | 250um ribbon fiber,ribbon cable,Bundle fiber optic cable |
The three polarity methods Type A, Type B and Type C are used to guarantee the right bi-directional allocation.
We will pack it by OPP bag and carton box outside to protect the goods from damage during delivery.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.