UL Listed FM Approved 2500 GPM Diesel Engine Driven Fire Pump 

Pump Performance Curve:

Fire Pumps shall meet the following basic requirements:

1. Each pump is to be tested hydrostatically for not less than 5 miniutes. The test pressure is to be not less

than 1.5 times the maximum working pressure of the pump, but in no case less than 250 psi (1724kpa)

2.  A pump shall develop not less than 65 percent of the rated total head when discharging at 1.5 times rated 

capacity. The maximum net pressure for a fire pump shall not exceed 140 percent of the rated head.

3.  The maximum pump brake horsepower shall not exceed the HP rating its driver, including service factor.