Welding Electrode Flux,welding powder,welding flux,manufacture welding electrode

Description:

The flux suitable for high speed welding and provides very good weld bead appearance and excellent slag removal even with narrow groove and fillet welds.

Applied to various welding wires such as H08A,H08MnA,H08MnMoand H10MnSi,it can weld low-carbon steel,low alloy steel and pressure vessel steel.It is also fit for fast welding of thin steel sheet like gas steel tanks and membrane water-cooled wall in boiler factory.

Specification:

NB/T47018.4-2011 GB/T5293-1999 F4A0-H08A F5A2-H08A F5A2-H08MnA

Equivalent to: AWS A5.17 F7A2-EL12 F7A2-EM12K F6A0-EL12

Attention:

1.Flux must be re-dried at 300-350℃(572-662℉) for 1-2 hour before welding.

2.Remove all rust, scale, paint and ect so as to obtain excellent weld metal.

3.Adding new flux regularly in order to avoiding causing welding defect and bad welding bead appearance when using flux again.

Package: In plastic woven bags of 25kgs net each,24tons goods with pallet can be loaded in 1*20'FCL, 26 tons without pallet loaded in 1*20'FCL.