2-6 meters hydraulic cutting plate machine for electrical switchgear, filing cabinets, kitchen utensils, car trunk decoration products such as sheet bending process, but also on carbon steel, stainless steel, aluminum, copper and other shear The First start the shearing machine machine for a number of loops, to ensure that under normal circumstances, try to cut different thickness of the sheet, from thin to thick. Make sure the user is familiar with the shears performance. Try to cut the different thickness of the blade must be adjusted to different blade gap. If you do not adjust the corresponding blade gap, then affect the blade durability.
2-6 meters hydraulic cutting plate machine to use
A, according to the thickness of the material being cut, adjust the blade gap.
B, according to the width of the material being cut by the mold or fixture.
C, the machine before the operation for 1 - 3 times the empty trip, the normal before the implementation of cutting work.
2-6 m hydraulic shears maintenance method:
1, in strict accordance with the operating procedures to operate.
2, each time before the start according to lubrication chart timing, fixed, quantitative plus lubricating oil, oil should be clean without precipitation.
3, the machine must always keep clean, no paint part of the anti-rust grease.
4, the motor bearing lubrication oil to regularly change the filling, and often check the electrical part of the work is safe and reliable.
5, regularly check the V-belt, handle, knob, button is damaged, wear and tear should be promptly replaced, and reported spare parts to add.
6, regularly check the repair switch, insurance, handle, to ensure its reliable work.
7, 10 minutes before get off work every day, the machine lubrication and scrub cleaning machine.
8, is strictly prohibited non-designated personnel to operate the device, usually have to do people off the plane stop.