Fanuc Servo Motor Cable 5M for A860-2000-T301

Fanuc A06B-6078-K811 Cable Spindle Encoder Cable Feedback Cable PLG Cable

5M Cable for A860-2000-T301

Product General Idea

Optical fiber jumper (also known as optical fiber connector), that is, access to the optical module optical fiber connector.There are many, but they can not be mutually interoperable. The SFP module is connected to the LC fiber connector, while the GBIC is connected to the SC fiber optic connector. Compared with twisted pair and coaxial cable, the optical fiber jumper has the following features of the following hills: 1. The attenuation is small: the transmission in the data fiber jumper is much smaller than the attenuation in the coaxial cable.A large area to maintain a constant. 2.Wider band: transmission distance up to tens of kilometers and the data transfer rate up to 2GbPs. The coaxial cable maximum transmission distance of only one kilometer while the data transfer rate up to hundreds of Mbps.Twisted pair is only a few Mbps. 3.High repeater spacing: only a small amount of repeaters, and low bit error rate. A test had been successfully done: 68km transmission distance, without the use of repeaters, GbPs can achieve the transfer rate, and its bit error rate of only 3.0 billion. 4.Small size, light weight: Compared with the coaxial cable, the diameter of optical fiber jumpers only 1/10 or even smaller. 5. Electromagnetic isolation: The data is transmitted in optical fiber jumper in the form of optical signal instead of electrical signal, so the system will not receive the influence of external electromagnetic field, impulsive noise or crosstalk.