Air Cooled Thermal Shock Test Chamber , Environmental Thermal Cycling Chamber 2 Zone
Air Cool Thermal Shock Test Chamber , Environmental Cycling Test Machine 2 Zone
Air Cool Thermal Shock Test Chamber Application :
Air Cool Thermal Shock Test Chamber and equipments is also known as hot and cold impact testing machine used to test or composite material structure,this is 2 zone type cycling chamber in an instant by the extremely high temperature and low temperature under continuous environment can endure degree, in order to test in the shortest possible time chemical changes caused by heat bilges cold shrink or physical damage. Applicable to metal and plastic, rubber, electronic...Such as material, can be used as the basis of its product improvements or reference.
Air Cool Test Chamber Feature:
- The best construction design to ensure smooth movement between cabinets.
- Using the new PWM refrigeration control technology to achieve 40% energy saving at low-temperature operation.
- Communication port equip to RS232 and USB port to save curves download function.
- Multiple alarm monitoring, configuration wireless remote alarm.
- Shock test move time within 5 seconds can meet MIL, IEC, JIS standard.
- Scalable: LN2V rapid cooling in liquid nitrogen control device.
- The world's first over-temperature protection and set conditions foolproof protection.
- Machine multiple protection devices, Error Fault Table software devices.
Air cool Test Chamber Specification :
| Item Name | Air Cool Thermal Shock Test Chamber , Environmental Cycling Test Machine 2 Zone | ||
| Model No | PT-2098A | PT-2098B | PT-2098C |
|
Test Cabinet Dimensions W×D×H |
400×400×300mm | 500×500×300mm | 600×600×300mm |
| Dimensions (mm) | 1360×1920×2050 | 1460×2300×2200 | 1620×2320×2200 |
| Temperature Range (℃) | -20℃, -40℃, -70℃, -80℃ ~ 200℃. | ||
| Thermal Shock Range (℃) | 0℃, -20℃, -40℃. -60℃ ~ 80℃, 100℃, 150℃. | ||
| Temperature Fluctuation (℃) | ±1℃ | ||
| Temperature uniformity (℃) | ≤ ±2℃ | ||
| Heating rate (℃) | 3℃ ~ 5℃/min (No-load) | ||
| Cooling rate (℃) | 1℃ ~ 2℃/min (No-load) | ||
| Recovery Time | ≤ 5min | ||
| High and low temperature conversion time | ≤ 10S | ||
| Experimental Cabinet Specifications | 2 cabinet hatchback basket types. | ||
| Cooling System | Air-cooled or water-cooled | ||
| Temperature control system | The new import LCD 5.7 inch TFT LCD touch controller | ||
| Refrigerating system | Original compressor (group) | ||
| Cooling method | Air-cooled | ||
| Heated system | Nichrome wire-efficiency heater, UL-shaped stainless steel plating heater. | ||
| Inner Material | SUS#304 stainless steel. | ||
| Outer Material | Spray color galvanized steel sheet. | ||
| Insulation Materials | Ultra-fine glass fiber insulation cotton. | ||
| Structure | Using 2 cabinet hatchback basket types, the sample rack based on the drive system which installation at bottom of the cabinet for reciprocating movement up and down. | ||
Air Cool Thermal Shock Test Chamer Photos :
Chamber Protection System :
- Test samples over-temperature protection (independent).
- With no fuse protection switch.
- Heater over-temperature protection switch.
- Compressors overload and overheat.
- Compressor high and low voltage protection.
- Over-current protective device.
- The controller self-diagnosis fault and display.
- Cooling water pressure is too low protection.
Standard configuration :
- Power cable 4.0 mm² x 5 cores, low-impedance rubber cable 3m x 1.
- Equipment electrical schematic diagram x 1.
- SUS # 304 square punching stainless steel shelf x 2.
- Stainless steel adjustable pitch shelf track of 2 groups.
- An energy-efficient lighting.
- Machine top Փ50mm a test hole attached stainless steel manhole cover, and with a silica gel plug. (option)
- Standard Test Meteorological gauze Volume x 1.
- Fuse set x 1 set (wearing parts).
- Operation Manual x 1.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.