Three Cases Trial Type Hot and Cold Impact Chamber for Smart Phone/Electroc Components
Three Cases Trial Type Thermal Test Chamber , Air Water Cooling Hot Cold Impact Chamber
Application of thermal shock Test Machine:
Air Water Cooling Hot Cold Impact Chamber is use to test material structure or composite materials, in an instant time under continuous environment by the very high temperature and very low temperature can tolerate level, test in the shortest time by thermal expansion and contraction caused by chemical changes or physical damage. Applications include metal, plastic, rubber, electronics or other materials. Can be use for basis or reference as to improve their products.
Features :
- The application of the servo coolant flow control technology in the system achieves the efficiency of over 40% energy saving
- The cycle is carried out, which can effectively remove frost once every 3 days, and defrost only takes 2 hours
- The net aluminum fin evaporator is used to reduce energy storage time and energy saving
- The inspection has two and three cases of test function, which is in accordance with the test specification
- Throughout the world, the first observation window is used to effectively measure visual effects
- Monitor real-time test curve analysis, equipped with RS232, USB data storage connection
- The picture and text explanation of the alarm device is obtained with the alarm prompt
- The protection mechanism of frosting and dew is avoided by automatic return to normal temperature of the test product.
Hot Cold Impact Chamber Parameters :
| Model | PT-2099A | PT-2099B | PT-2099C | PT-2099D | PT-2099E |
| Test Space (mm) | 400×350×350 | 500×500×400 | 600×500×500 | 700×600×600 | 800×700×600 |
| Outer Cabinet (mm) | 1400×1650×1650 | 1500×1900×1750 | 1600×1950×1850 | 1700×2400×1950 | 1800×2600×2000 |
|
Temperature Range(℃) |
-20℃,-40℃,-70℃,-80℃~250℃ | ||||
| Impact Range(℃) | 0℃,-20℃,-40℃,-60℃~80℃,100℃,150℃, | ||||
| Temperature fluctuation(℃) | ±0.5℃ | ||||
| Temperature uniformity(℃) | ≤±2℃ | ||||
| Heating rate(℃) | 3℃~5℃/min (no load) | ||||
| Cooling rate(℃) | 1℃~2℃/min (no load) | ||||
| High and low temperature conversion time | ≤10S | ||||
| Recovery time | ≤5min | ||||
| Test box specification | Stationary,three-cased trial type | ||||
| Cool System | Air cooled or water cooled | ||||
| Temperature control system | Impoted LCD 5.7 Inch new color LCD touch controller | ||||
| Refrigeration system | Compressor | ||||
| Cooling Method | Air Cooling | ||||
| Heat System | Nickel-chrome wire high efficiency heater, UL stainless steel plating heater | ||||
| Inner Material | ＳＵＳ＃３０４ Stainless steel material | ||||
| Outer Material | Steel plate and high spray treatment | ||||
| Heat preservation material | Ultra-fine fiberglass insulation cotton | ||||
| Structure | The upper part is the low greenhouse, the middle is the studio, and the lower part is the high greenhouse.The test product is not moved in the working room, and the high and low temperature impact is automatically switched by pneumatic switch of the air door. The control cabinet is placed in the upper right corner for easy operation. | ||||
| Protect System |
1.Over temperature protection of test products (independent) 2.With non-fuse protection switch 3.Heater overtemperature protection switch 4.The compressor overloaded and overheated 5.High and low pressure protection of compressor 6.Overcurrent protection device of the system 7.The controller determines the fault and displays it 8.The cooling water pressure is too low for protection |
| Standard configuration |
1. Power cord 4.0mm squared x5 pistils, low impedance rubber cable 3m long 2. Electrical schematic diagram of the equipment 3. Stainless steel SUS #304 square punch plate holder 2 pieces 4. Stainless steel adjustable spacing rack track 2 sets 5. One energy-saving lamp 6. The top of the body USES a 50mm test hole with 1 stainless steel hole cover and 1 silicone plug head.(optional) 7. One roll of weather gauze for standard test 8. One set of fuse (vulnerable parts) 9. One set of operating instructions |
| Standards |
6,GJB367.2-87 405 7,SJ/T10187-91Y73 8,SJ/T10186-91Y73 9,IEC68-2-14_ 10,GB/T 2424.13-2002 11,GB/T 2423.22-2002 12,QC/T17-92 13,EIA 364-32 |
Machine Picture
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.