Adhesive Tape Rolling Wheel Testing Equipment Electric Type PSTC-8

Application: Adhesive Tape Rolling Wheel Testing Equipment Electric Type adheres the tape to the standard test steel plate at a fixed pressure and speed (300 mm per minute or 600mm per minute ) for use as test specimen of tape retentivity force or peel / stripping / shearing force testing.It meets the test standards 

Parameters of electric roller :

​

Operation Steps for electric roller :
1. Place the machine table in a flat, solid working table and adjust level of the machine .
   (The board is benchmarked, adjusted to 0.02/1000)
2. Connecting pwer line, press power button.
3. Put the test board (face up), flatly and positively on roll plate, then place adhesive tape down on the  test board.
4. Check the position and attitude of roll wheel , (which easily loaded and unloaded), make it in a normal  rolling state.
5. Set the roll times and speed on touch screen, press “ Start“ , it will roll the specimen automatically until it reaches the set test times,

    then stop the test automatically.
6. If the roller compaction need to be stopped, press “Stop "
7. Please cut off the power,after working, and clean up the residue

Electric Roll Down Machine Photo: