Simulated Transportation Vibrating Test Table

Use :Simulating automobile transportation shaking table test machine is suitable for transportation test of toys, electronics, furniture, gifts, ceramics and other packaging and transportation parts.

Vibrating Table Specifications :

Operation Steps :
a) Confirm that the power supply meets the requirements and confirm that the grounding is reliable;
b) Adjust the plum blossom handle so that the sample clamping device can move flexibly back and forth, left and right;
c) Place the sample to be tested in the middle of the work surface;
d) Move the clamping device around the sample and fix it with a plum blossom handle. The clamping force should be controlled and the sample should not be damaged;
e) Connect the power supply (220V/50Hz); the touch screen displays at this time, and the machine is in standby state;
f) Press <Enter Test> as shown in the figure below. After setting the time, press to select <Scan Frequency> in <Fixed Frequency>, and then press Test. When the machine runs for the set time, the machine will Automatic shutdown;

g) After the test is completed, turn off the power switch, remove the test product, and write down the test data;
h) Organize the machine and fix the guardrail.

Vibrating Table Picture :