Low Tension Cloth Stenter Finishing Machine For Mosquito - Net Stretching / Heat Setting
Mosquito-net streching & heat setting Stenter finishing machine , Low-tension
1. Machine working flow:
Open width entry ---J-Scray with cloth guider ---- Padder --- Tension applicator ---- Infrared center guider ---- Expanding roller (flat-wired type) ---- Lower overfeeding + screw expending ---Upper overfeeding --- Edge detecting & four-finger uncurler device--- Pinning-on ---- Chambers for heat setting ---Air cooling --- Pinning-off ---- End section --- Plaiting & batching.
2. Machine Features:
- All bearings for chains filled with imported high temperature grease.
- Head with touch screen system and all chambers’ temperaturer displayed on it .
3. Technical specifications:
| Machine Roller width: | 1400-3800mm | Fabric Working width: |
1200-3600mm
|
| Heat system: |
oil/gas/steam
|
Width adjustment range: |
700-3600mm
|
|
Chambers quantity
|
As required | Max.Temperature of the chambers: |
100-220℃
|
| Fabric held by: |
clip/pin/combined
|
Air pressure: | above 0.5mpa |
| Overfeed range: |
-10% to 80%
|
Installed power: |
Approx 120Kw
|
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.