High - efficiency Hot air stenter machine , good thermal insulation , energy saving

1. Functions of Stenter Machines

1) Heat setting is done by the stenter for lycra fabric, synthetic and blended fabric.
2) Width of the fabric is controlled by the stenter.
3) Finishing chemical apply on fabric by the stenter.
4) Loop of the knit fabric is controlled.
5) Moisture of the fabric is controlled by the stenter.
6) Spirility controlled by the stenter.
7) GSM of the fabric is controlled by stenter.
8) Fabric is dried by the stentering process.
9) Shrinkage property of the fabric is controlled.
10) Curing treatment for resin, water repellent fabric is done by the stenter

2. Main technical data:

3. Components of Stenter Machine:

Padder
Photoelectric Weft straightner
Burners
Heat recovery(Options)
Attraction rollers
Circulating fans
Exhaust fans
Winder
Clips
Pins
Cooling drums

4. Working Procedure of Stenter Machine

open-width fabric entry→ spreading→infrared centering→padder→ weft straightener →overfeed→uncurling→infrared detect→ pinning→stentering→air cooling→depinning→fabric exit→plaiting/winding

5.. Features of the machine:

1) Permit high production speeds with high efficient chambers.

2) By virtues of advanced PLC system and computerized control with interface operation, the machine is easy to be operated.

3) The best design of airing system makes it possible to adopt the air circulation quantity penetrates to the fabric uniformly, the handle of fabric and softness can be increased.

4) Thanks to the exhaust-air inverter control system, the energy can be saved and the high production can be get with efficient cost.

5) Each rail width of setting chamber can be adjusted by seperated driving motor at the same time or independently at different time.