Intellectural Loop Steam Ager , Reactive & disperse dye , good heat - retaining

1. Machine application:

The loop steam ager is used to color-fix and bake for the fiber after being dyed, it applies for synthetic fiber, chemical fiber, knitted fabrics and non-woven fabrics. Also many kinds of dyestuffs are applicable, the weight of the fabrics is from 50 g/m² to 450 m².

2. Equipment process flow:

Open-width fabric-input → loop → ageing → open-width doffing

3. Technical Parameters:

Machine hand: left or right

Nominal width: 1800 to 3600mm according to users’ requirement

Working width: 1600 to 3400mm

Nominal machine speed: 5 to 50m/min

Looping height: 1.5 to 2.5m

Drive mode: main chain drive adopts AC servo motor, entry and exit adopts multiunit AC frequency drive; PLC is programmable controlled, electric cabinet supplied with air condition.

General power: about 32kw

Heat source: steam or thermal oil

4. Machine constructions:

1) A set of moisture temperature system: The middle section of the loop ager used in oil circulation heating system. Mainly including temperature adjustment device, temperature controlling and measuring device, electric three-way valve.
2) A set of pipe fittings: To be used in the middle section of the steamer.Consisting of: stop valves in front of and behind the regulator valve in supply pipe, stop valve in return pipe, draining valves, venting valves.
3) Power supply cabinet: consisting of PLC, interface operating screen, AC frequency converter, main switch and buttons.
4) AC motor drive: consisting of PLC,synchronizer, switching and controlling device, controlling cabinet, etc.
5) Wiring material for the entire range.