Horizontal Rail Stenter Machine Textile Finishing Machine Exit Type Plaiting / Batching
Power saving textile finishing Machine , horizontal rail , open - width
1. Woking Process:
Open width entry --- Infrared center device ---- J-scray ---- Padder --- Tension applicator --- Auto weft straightner ---- Expanding roller ---- Lower overfeeding screw expending ---Upper overfeeding --- E+L Edge detecting & two-finger uncurler device--- Clipping-on ---- Chambers for heat setting ---Air cooling --- Clipping-off ---- End section --- Plaiting & batching.
2. Main technical data:
| Roller width: | 3600mm | Working width: |
3400mm
|
| Heat source: |
nature gas
|
Width adjustment range: |
700-3400mm
|
|
Chambers No.
|
6 | Temperature of chamber: |
100-220℃
|
| Fabric held by: |
clip/pin/combined
|
Air pressure: | above 0.5mpa |
| Overfeed range: |
-10% to 30%
|
Installed power: |
Approx 120Kw
|
INFRA-RED DRIER
For drying of glued selvedge by Infrared radiation, pre-dried glued selvedge will help in quick drying in subsequent drying process in Stenter.
CHAIN DRIVE SYSTEM
Individual chain drive enables very simple chain operation and maintenance.
Special shock absorbers are provided for smooth turning of chain.
DRIVES
All fabric transport drives with frequency controlled AC-Drives.
BENEFITS
Individual chain drive for enables very simple chain operation and maintenanceThe operation and maintenance of chain is very simple.Controlled deceleration of speed to final standstill for normal machine stoppage and emergency stop.Parameter set-up easy due to automatic control of drives.All types of fabrics can be accurately run and controlled with AC-Drives.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.