PTFE Dispersion / 60% Solid Content / Aqueous Liquid / No PFOA / Anti-Droping

PTFE Dispersion / 60% Solid Content / Aqueous Liquid / No PFOA / Anti-Droping

Brief Introduction

Everflon^® PTFE Dispersion D60 is a milky white aqueous with non ionic surfactant. It provides inertness to nearly all industrial chemicals and solvents;stability at high temperatures;excellent dielectric properties;lowest coefficient of friction of any solid materials; excellent weatherability and no-stick characteristics, using temperature is between -240°C (-400F) to 260°C (500F).

Data List of Everflon PTFE Dispersion D60F

Main Processing Way of Everflon PTFE Dispersion D60

Conventional dip or flow techniques can be used for coating or impregnating high temperature fabrics, fibers, and other products with Everflon^® PTFE D60. A continuous PTFE resin coating on woven fabrics made of fiberglass, or other high temperature-resistant fibers can be made by dip coating. Multiple passes may be used to build the desired thickness to produce a smooth, crack-free coating.

Everflon® PTFE D60 is formulated to provide good rewetting on each pass. Each coating layer is usually dried to remove water (typically at 120 °C [250 °F]), baked to remove the wetting agent (typically at 270 °C [518 °F]), sometimes calendered, and finally heated above the crystalline melting point of the resin particles(approximately 337 °C [639 °F]).

The details please visit www.everflon.com.

Main Application of EverflonPTFE Dispersion D60P

1. Anti-drip

Package&Delivery

Everflon®  PTFE D60 must be properly stored to maximize the stability of the dispersion. The PTFE particles will settle on prolonged standing and/or on prolonged heating— temperatures above 40°C (104 °F) should be avoided.

The dispersion must be protected from freezing, which will cause irreversible settling.

The optimum storage temperature range is 7–24 °C (45–75 °F). If dispersions are to be stored for extended periods, lower-temperature storage is desirable.

For optimal performance, Everflon® PTFE D60 should be gently mixed or rolled monthly and prior to use.

Storage and handling areas should be clean.Keep dispersiondrums closed and clean to avoid both contamination and coagulation by drying at the liquid surface. High processing temperatures will cause even very small foreign particles to become visible and/or to make defects in finished products.

Good housekeeping and careful handling are essential.