Quality NDT X ray machine Unicomp UNC225 with ASTM standard EN12543 for shock absorber defect testing
Features:
X-Ray shielded cabinet complies with the strictest international regulations for fully shielded radiation devices. The cabinet is completely self-contained. Manufactured in steel with complete lead shielding.
Equipped with X-Ray sources from 160kV or Micro – focus sources up to 150kV .
Equipped with Digital Flat Panel Detector (different sizes and resolution available).
Cabinet designed with a double sliding door for casting loading with a lead/glass inspection window.
Loading door equipped with safety light curtains.
High speed door movements controlled by inverter.
Electronic safety circuits controlled by multifunction controller
Blinking X-ray on warning lights interlaced with light fail circuit.
Applications:
It is widely applied to inspect all kind of casting,NDT for air bubble,porosity and unwanted foreign.The equipment is applicable objects for NDT of cylinder welding defects and body,sidewall,lap,Crown steel cord and steel belt of tyre slag inclusion,crack,loosen and other flaws in hubs,pressure vessel,refractory material,bullet,boilr welded pipe and screwy pipe.
| System Parameters | Dimensions | 2230mm*1582mm*2478mm(L*W*H) |
| Equipment weight | 5T | |
| Power | 8KW | |
| Maximum penetration(AL/FE) | 150mm/25mm | |
| Detection range | Φ500*800mm | |
| Load weight | 100kg | |
| Work environment | 5-40° ≤80%HR | |
| Install power | Three-phase five wire system AC380V | |
| X-ray leakage dose rate | ≤1uSv/h | |
| X-ray Generator | Tube voltage | 225kV |
| Power | 640W/1600W | |
| Focal size | 1.0mm/3.0mm | |
| Detector | Image area | 215mm x 215mm |
| Resolution | 2.8LP/mm | |
| Detector ( Selection FPD ) | Image area | 250mm x 300mm |
| Pixel matrix | 1792mm*2176mm | |
| Pixel size | 139μm | |
| Frame rate | 9fps(1x1)30fps(2x2) | |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.