Computer Controlled Cable Testing Equipment , Wire Tensile Testing Machine
Computer controlled optical cable tension testing machine tension tester
Description
The equipment is used to test optical cable tensile properties within the prescribed tensile load (that is usually tensile properties during installation), that means optical fiber attenuation, optical fiber
strain, and function relation of optical cable strain and tensile load
The equipment adopts computer control, servo motor drive, precision ball screw drive loading, and precision load sensor signal measurement With the function of stable loading, accurate measurement, fast control response, various control modes, can conveniently and accurately realize the digital calibration of load and elongation, it also has the characteristics of full load protection and position protection etc.
Main Specification
| Model | GLW-50 | GLW-100 |
| Force capacity | 50kN | 100kN |
| Force Range | (1%-100%)F.S. | |
| Force Resolution | +250000 Steps, the same resolution without step division | |
| Force Accuracy | ±0.5% | |
| Force keeping time | more than 3 hours, set freely | |
| Force keeping relative error | ±0.5% | |
| Deformation measurement range | 1000mm | |
| Deformation test Range | (0~50)mm | |
| Deformation Resolution | 0.001mm | |
| Deformation value Accuracy | ±0.5% | |
| Displacement Resolution | 0.001mm | |
| Displacement Control Resolution | 0.000015mm | |
| Displacement value Accuracy | ±0.5% | |
| Displacement Speed Range | (0.01 -500)mm/min, set freely | |
| Displacement Speed relative error | ±0.5% | |
| Tensile space | 25m | |
| Effective Tensile Travel | 1000mm | |
| Clamping cable diameter | 30mm | |
| Host power supply | AC220V±10%,50~60Hz,2kW | |
| Computer Power supply | AC220V±10%,50~60Hz,0.5kW | |
| Weight |
3500kg |
|
Product configuration
- Servo drive and servo motor: Japan YASKAWA
- Load sensor: America Vishay
- Deformation measurement device: Shanghai Liangxing
- Reducer: Star reducer
- Wheel set: HERRMN
- AEC-1200 controller: HERRMN
- Computer
Installation Requirement
Host power supply: single phase, AC220V±10%, 50～60Hz, 2kW.
Computer power supply: single phase, AC220V±10%, 50～60Hz, 0.5kW.
Install onto a stable base, levelness≤0.2/1000, and room of more than 1 m around.
Ambient temperature: 25℃±10℃, humidity: ≤80% non-condensing.
No vibrating or corrosive media indoor.
Lay-out Drawing
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.