5.6m Height 3.5t Explosion Proof Sit Down Electric Powered Forklift
Advantages:
Our Ex AC type electric forklift is approved with Explosion-proof mark: Ex d mb s ⅡB T4 Gb/Ex tD A21 IP65 T130℃ explosion-proof equipment for Category 2G, applicable to Zone I and Zone II which may have explosive gas environment. Offer high safety functions according to international standards.
- Side-put lifting cylinders and chains offer Wide-view visibility .
- AC Variable-frequency speed control technology, greatly improved the reliability and safety.
- Advanced H-drive axle, low center of gravity design, with stable turning.
- With regenerative braking system, ramp soft starting, reverse braking system and other protection settings. Improve the safety under the hazardous environments.
- Charger connection and emergency switch have an inter-lock system, safe for charging.
- Special explosion-proof sealed VBS batteries conform to UK BS directive.
- With anti-friction flameproof brake plate.
- With alloy copper plated truck back body and forks.
SIZE INFORMATION
| Model | CPD15Ex | CPD20Ex | CPD30Ex | CPD35Ex | |
| Explosion-proof | Exd mbsⅡBT4 Gb/Ex tD A21 IP65 T130℃ | ||||
| Operation type | seated | seated | seated | seated | |
| Capacity/rated load | Q(kg) | 1500 | 2000 | 3000 | 3500 |
| Load centre distance | c(mm) | 500 | 500 | 500 | 500 |
| Lift height | h3(mm) | 3000~5600 | 3000~5600 | 3000~5600 | 3000~5600 |
| Load distance, centre of drive axle to fork | x(mm) | 428 | 428 | 498 | 498 |
| Wheelbase | y(mm) | 1460 | 1460 | 1850 | 1850 |
| Service weight(with battery) | kg | 3520 | 3680 | 5120 | 5300 |
| Axle loading, laden front/rear | kg | 4210/810 | 4820/860 | 7260/860 | 8010/790 |
| Axle loading, unladen front/rear | kg | 1660/1860 | 1760/1920 | 2510/2610 | 2620/2680 |
| Tyre size, front | 6.50-10-10PR Ex | 6.50-10-10PR Ex | 28×9-15 Ex | 28×9-15 Ex | |
| Tyre size, rear | pcs | 5.00-8-8PR Ex | 5.00-8-8PR Ex | 6.50-10-8PR Ex | 6.50-10-8PR Ex |
| Wheels, number front rear(x=driven wheels) | b10(mm) | 2x/2 | 2x/2 | 2x/2 | 2x/2 |
| Tread, front | b11(mm) | 970 | 970 | 1000 | 1000 |
| Tread, rear | 920 | 920 | 970 | 970 | |
| Tilt of mast/fork carriage forward/backward | . | 3/6 | 3/6 | 4/6 | 4/6 |
| Height, mast lowered | h1(mm) | 2090~2450 | 2090~2450 | 2040~2660 | 2040~2660 |
| Height, mast extended | h4(mm) | 4067~6667 | 4067~6667 | 4280~7280 | 4280~7280 |
| Height of overhead guard(cabin) | h6(mm) | 1992 | 1992 | 2140 | 2140 |
| Seat height | h7(mm) | 980 | 980 | 1100 | 1100 |
| Coupling height | h10(mm) | 480 | 480 | 590 | 590 |
| Overall length | l1(mm) | 3300 | 3300 | 3755 | 3755 |
| Length to face of forks | l2(mm) | 2160 | 2160 | 2640 | 2640 |
| Overall width | b1(mm) | 1140 | 1140 | 1220 | 1220 |
| Fork dimensions | s/e/l(mm) | 45/120/1070 | 50/120/1070 | 55/130/1070 | 55/130/1070 |
| Fork carriage type A,B | A | A | A | A | |
| Fork carriage width | b3(mm) | 980 | 980 | 1200 | 1200 |
| Ground clearance, laden, below mast | m1(mm) | 100 | 100 | 110 | 110 |
| Ground clearance, centre of wheelbase | m2(mm) | 130 | 130 | 140 | 140 |
| Aisle width for pallets 1000×1200 crossways | Ast(mm) | 3600 | 3600 | 4080 | 4080 |
| Aisle width for pallets 800×1200 lengthways | Ast(mm) | 3400 | 3400 | 3880 | 3880 |
| Turning radius | Wa(mm) | 1980 | 1980 | 2430 | 2430 |
| Travel speed, laden/unladen | km/h | 11.5/12 | 11/11.5 | 11.5/12 | 11/12 |
| Lift speed, laden/unladen | mm/s | 280/300 | 260/300 | 220/240 | 200/240 |
| Lowering speed, laden/unladen | mm/s | <600 | <600 | <600 | <600 |
| Max. gradeability, laden/unladen | % | 10/15 | 10/15 | 10/15 | 10/15 |
| Service brake | mechanical/hydraulic | ||||
| Battery voltage, nominal capacity K6 | V/Ah | 48/480 | 48/540 | 80/480 | 80/540 |
| Battery weight | kg | 820~860 | 920~960 | 1320~1380 | 1480~1540 |
| Type of drive control | AC | AC | AC | AC | |
| Sound level at the driver’s ear acc.to DIN 12053 | dB(A) | 68 | 68 | 68 | 68 |
PRODUCT DESCRIPTION
FAQ
Q1: Can Herrman provide customized products? OEM products or ODM products?
A1: Yes, Herrman can provide customized products according to your requirement. Both OEM and ODM are acceptable. We do a lot ofnon-standard products, welcome your special custom-made.
Q2: What's the specification of the chargers?
A2: Herrman have all kinds of the chargers and welcome the customers to custom-made.
Q3: How about the delivery time?
A3: Usually Herrman producing time is 15-20 working days after we receive the advanced payment. For some standard products, we have most in stock and could delivery immediately.
Q4: Can we print the LOGO on products?
A4: Yes, the OEM is available with the permission of our customers.
Q5: What is your payment term?
A5: T/T,L/C or O/A if you want any other way, please contact us.
Q6: What can I get from cooperating with Herrman?
A6: 1. Unique products, with customized service.
2. Timely production and delivery, time is money.
3. Market protection service, long term business strategy.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.