Mindray Hematology Reagents MINDRAY BC-5390 BC-5380 BC-5300 BC-5180 BC-5100 ( with Barcode)

Usage of Mindray CBC Reagents

To be used for blood cell counting, sizing, and WBC differentiation, hemoglobin determination on Mindray BC-5390 BC-5380 BC-5300 BC-5180 BC-5100 hematology analyzers. This product is for In Vitro Diagnostic use only.

Specification of Mindray CBC Reagents

Does CBC analyzer need use products for calibration or quality control?

Calibration products are required in the following situations:

1. New instrument

2. After a major maintenance

3.The results of the quality control are not controllable.

4. The manufacturer recommends that the instrument be tested every six months or three months to ensure the accuracy of the instrument.

Quality control needs to be done once or twice a day.

Precaution

1. This product is an in vitro diagnostic reagent;

2. Pay attention to seal and prevent pollution;

3. Read the instructions carefully before use, and should stop using them when they exceed the period of validity;

4. If the product freezes, it should be completely defrosted at room temperature and used after mixing.

5. Waste liquid, waste, residual products and treatment of contaminated packaging materials, please comply with local regulations;

6. It is strictly forbidden to eat and avoid contact with eyes and skin. Once Contact your eyes and skin,please clean immediately with plenty of water and seek medical advice.

Some product questions you may want to ask:
1) What is the principle of 3 part hematology analyzer?
In a 3-part analyzer the cell counting is based on the Coulter Principle. All hematology analyzers utilise Coulter's Principle. 3-part differential cell counter employs Coulter's Principle to determine the size as well as volume of the cells. Coulter's principle is applied employing two electrodes.

2) What is the diluent in the hematology analyzer?
The diluent for the hematology analyzer comprises sodium chloride, sodium sulfate, a phosphate buffer agent, ethylene diamine tetraacetic acid, 1-pyridone-2-sulphur and formaldehyde, and the pH value of the solution is 6.5-7.4, and preferably is 7.2; the content of each component is preferably as follows: 5g/L of ...

3) What is the use of Lyse in hematology analyzer?
It is used to lyse (destroy) red blood celis for hemogiobin determinations or aid in the counting of white blood cells. Applicable to the hematology analyzers.

We have barcode for Mindray Hematology Analzyers.