Busbar Split Core Current Transformer , Current Transformer Clamp Type Lead Output

Price Negotiable

Price: Negotiable

MOQ: 1 PC

Delivery Time: Within 7 Days

Brand: GFUVE

Product Description

Busbar Type Split Core Current Transformer for Measuring Instrument

Introduction

The model Q125 current clamp on measuring instrument can be used for a current vector for the copper bar or the power aluminum bus bar on-line detection.

Features

This product can be used for a current vector for the copper bar or the power aluminum bus bar on-line detection.
holding wire diameter: 120mm*50mm
Dimension: 116mm×327mm×35mm
Load capacity: mA output ≤4Ω,1A output 0.1Ω, 5A output 2.5VA
Installation: clamp type
Output mode: lead output

Applications

1. Electric energy meter calibrator (on site)

2. Double clamp type ground resistance tester

3. Double clamp type phase volt-ampere meter

4. Digital multi-meter

5. Multi-function energy meter

6. Oscilloscope

7. Power quality analyzer

8. Matched instruments

9. Calibration instrument on site

Parameter

Electrical parameters
Ratio	1000: 1 or 2000:1 (customized)
Accuracy class	0.2%, 0.5%, 1%
Primary current	0 - 3000A AC
Secondary current	0 - 5A AC (customized)
Max. Cont. Input current	3600A
Over voltage category	CAT III 600 V
Output signal (AC current)	500mA,1A,5A AC at nominal input current
Electrical parameters - continued
Output signal (AC voltage)	333mV,500mV,1V,5V AC at nominal input current
Frequency range	40Hz-2000Hz
Dielectric strength	3KV 50Hz/60Hz at 1 minute
Temperature range	-20°C to +55°C
Output	2.5 meter cable with D01 connector
Max. voltage not insulated conductors	600 V
Standard	EN 61010-1, EN 61010-2-032, IEC60044-1
Installation	Clamp type
Output mode	Lead output (2.5m)
Mechanical parameters
Dimensions (L x W x H) (mm)	116 x 327 x 35
Weight (g)	1200
Holding wire diameter (mm)	φ120 x 50
Max. jaw opening (mm)	50
Jaw color	White
Material	PC+ABS+Polycarbonate, UL94 V0