Stamping And Feeding Decoiler Straightener Feeder Equipment Fully Automatic
Air feeder, stamping and feeding equipment, automatic stamping and feeding equipment
The air feeder is the earliest feeding device used in the stamping industry. Its principle is to use the air source as the power to clamp the material through the cylinder.
Feeding is carried out by the telescopic stroke of the cylinder, and the adjustment of the feed length is controlled by the length of the stroke of the cylinder.
Air feeder advantages: easy to operate, easy to install, affordable, and can achieve automatic stamping feeding equipment at the lowest price.
In actual production, it is mainly used for feeding of stamping products with low precision and fast speed.
Disadvantages of air feeder: easy to damage materials, O-ring wear has an impact on the feeding accuracy.
The roller feeder is the most widely used feeding device at present. The principle is that the connecting rod is connected with the output shaft of the punching machine, and the punching is used to drive the operation.
The feeding length of the feeding machine is adjusted by adjusting the yaw amplitude of the eccentric disk.
Advantages of high-speed roller feeder: high feeding accuracy, high speed, no additional energy supply, and extremely low failure rate.
Disadvantages of high-speed roller feeder: Due to the limited eccentricity of the eccentric disk, the maximum feeding length can only reach 300mm, and the feeding step adjustment is inconvenient. The punching machine needs the output shaft to be installed.
Specifications:
| Model | MAC4-600F | MAC4-800F | MAC4-1000F | MAC4-1300F |
| Stock Width(mm) | 70~600 | 70~800 | 70~1000 | 70~1300 |
| Stock Thickness(mm) | 0.6~6.0 | 0.6~6.0 | 0.6~6.0 | 0.6~6.0 |
| Max.Coil Weight(kg) | 5000 | 5000 | 7000 | 10000 |
| Max.Coil O.D.(mm) | 1400 | 1400 | 1400 | 1400 |
| Coil I.D.(mm) | 508 | 508 | 508 | 508 |
| Feed Length(mm) | ~500* | ~500* | ~500* | ~500* |
| Max.Line Speed(m/min) | 16~24 | 16~24 | 16~24 | 16~24 |
| Work Roll Number(piece) | upper 6/lower 5 | upper 6/lower 5 | upper 6/lower 5 | upper 6/lower 5 |
| Feed Roll number(set) | 1 | 1 | 1 | 1 |
| Main Motor | AC7.5 | AC11.0 | AC11.0 | AC11.0 |
| Mandrel Expansion | Hydrauilc | Hydrauilc | Hydrauilc | Hydrauilc |
| Reel Motor(kw) | 2.2 | 2.2 | 3.7 | 7.5 |
| Power(v) | 3 Phase 220V/380V/50HZ | |||
| Operating Air(Mpa) | 0.49 | 0.49 | 0.49 | 0.49 |
Straightening Performance:
| Model | MAC4-600F | MAC4-800F | MAC4-1000F | MAC4-1300F | |
| Stock Thickness (mm) |
0.8~2.3 | 600 | 800 | 1000 | 1300 |
| 2.8 | 933 | 933 | |||
| 3.2 | 714 | 714 | 714 | ||
| 4.0 | 457 | 457 | 457 | 457 | |
| 4.5 | 361 | 361 | 361 | 361 | |
| 5.0 | 293 | 293 | 293 | 293 | |
| 6.0 | 203 | 203 | 203 | 203 | |
Products:
2. After-Sales service:We have an efficient team to meet 24*7 all day service.
3. Full-Service:Actively cooperate with customers to deal with problems in equipment using.
4. Engineers can provide service machinery overseas.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.