In order to really improve the efficiency of stamping production, continuous molds must be used, and all continuous molds must be equipped with an automatic feeder to complete the punching of each step in order to ensure efficient use, which is called step, and the step is fed by Machine to complete.

In actual production, the feeder may sometimes fail to feed the mold correctly and accurately. Because the relationship between the feeder, the mold, and the punch is continuous in a cycle.

When the feeder does not have a step, the press may have received a signal from the feeder, and the punch starts to punch under the action of the feeder signal.

At this point, the mold is mounted on the punching surface, the punch will start working due to the wrong signal, but the strip of the feeder has not yet reached the specified position, so the punch will break the mold.

The punching machine will stamp the strip and the mold after receiving the control signal of the detecting controller and the feeding signal of the feeder. The structure is simple and compact, and the mold can be effectively protected, avoiding loss in the stamping production process, improving production efficiency and reducing Production costs are safe and reliable.

After the detecting block is in contact with the detecting controller, the detecting controller sends a control signal to the punching machine. After receiving the two signals of the detecting controller and the feeding machine, the punching machine drives the upper template to drive the cutting punch to move downward, and the cutting punch will be cut. The strip is cut to obtain waste.

The strips on the punching table are stamped with the mold after the action of the pressing plate, and the required processing requirements have been completed, thus achieving precise control of the feeding.

Specification:
 

Straigtening performance:
 

*1:(Pneumatic):Option in case of pneumatic mandrel expansion is provi