Automatic 3 in 1 Aluminum 0.6-6.0 mm Thickness Feeder Decoiler and Straightener Machine

 
The 3-in-1 feeder is a fully automatic feeding device that integrates feeding, rectification and material racks. It not only improves production efficiency but also reduces labor. It is an efficient product.
3-in-1 feeder loading:
1. Place the material on the crane and stabilize it.
2. According to the oil pressure relaxation, reduce the material frame to a certain diameter, slowly feed the material into the main shaft of the material rack, and make the center of the material coincide with the scale on the tile. Stop the advance and remove the crane.
3. the material is placed well, according to the oil pressure expansion and tightening material, the material is in a state of tension.
 
4. Press down on the hydraulic pressure press arm and place the knob in the automatic position. Raise the support arm and remove the material packing tie, pay attention to the material rebound. (The hydraulic pressure arm must be pressed down, otherwise it may cause the material to loosen and pay attention to the position of the person.)
 

Specification:
 

Straigtening performance:
 

*1:(Pneumatic):Option in case of pneumatic mandrel expansion is provi