1550nm 2 Meter LSZH MTP Trunk Cable 12F MTP Female To MTP Female
1550nm 2 Meter LSZH MTP Trunk Cable 12F MTP Female To MTP Female
2 Meter Elite Loss USconec 12F MTP Female to MTP Female Trunk Cable SM 9/125um LSZH Yellow Fiber Optic Patch Cord
12F MTP(Female)- MTP(Female) 3.0mm LSZH Patch cable/trunk cable. MTP Fiber Patch cable/trunk cable is terminated with MTP connector on both ends. MTP Patch cable/trunk cables connect MTP modules together as a permanent link. The Patch cable/trunk cables are available with 12, 24, 48,60,72 ,96,144fibers. Support speeds up to 10/40/100Gbps data center solutions. They are typically adopted to interconnect cassettes, panels or ruggedized MTP fan-outs, and to facilitate rapid deployment of high-density backbone cabling in data centers and other high fiber environments. Besides, MTP also provides much flexibility and convenience once you have to change the connector style in the patch panels. Instead of changing the connector on the cable trunk, just installing a new cassette with the new connector style on the cross-connect side of the patch panel.
The merits of MTP/MPO Patch cable/trunk cable generally include:
High quality—MTP/MTP Patch cable/trunk cables are factory pre-terminated, tested and packaged along with the test reports. These reports serve as long-term documentation and quality control.
Decreasing cable volume—MTP/MPO Patch cable/trunk cables have very small diameters, which decrease the cable volume and improve the air-conditioning conditions in data centers.
Time saving—With the special plug and play design, MTP/MPO Patch cable/trunk cables can be incorporated and immediately plugged in. It greatly helps reduce the installation time.
All of OMC’s MTP Connectors are from USconec. MTP Patch cable/trunk cable is a kind of high-density cable assemblies which is generally use in three areas.
1, The Data Center application with high dense degree environment
2, The optical fiber to the building
3, The internal connector application in fiber equipment.
MTP products’ Details& Standard
| Connector | Reference | Housing Details |
| MTP Singlemode | IEC 61754-7 |
SM APC: Green connectors+black boot (Standard Loss MTP) SM APC: Yellow connectors+black boot (Elite MTP) |
| MTP Multimode | IEC 61754-7 | OM3&OM4 PC: Aqua connectors+black boot (Standard Loss&Elite MTP) |
| Fiber Count | OD(mm) |
Minimum allowable Tensile Strength (N) |
minimum allowable Crush Load(N/100mm) |
Minimum Bending Radius(MM) |
| 12 | 3.0±0.15 |
Short-term: 180； Long-term: 90 |
Short-term: 500； Long-term: 150 |
Static:10D Dynamic:20D |
MTP Patch cable/trunk cable ’s Specification:
| Spec items. | Single mode (APC 8-degree polished) | Multimode (PC Flat polish) |
|
Insertion loss (MTP) (IEC 61300-3-34) |
Standard MTP:≤0.75dB(max), ≤0.35dB(Typical) Elite MTP:≤0.35dB(max), ≤0.20dB(Typical) |
Standard MTP:≤0.6dB(max), ≤0.35(Typical) Elite MTP:≤0.35dB(max) , ≤0.20dB(Typical) |
| Return loss(MTP) | ≥60dB(8degree polishing) | ≥25dB |
| Durability | <0.3dBtypical change, 200 matings | |
| Interchangeability | ≤0.2dB | |
| Tensile strength | >70N | |
| Operating Temperature | -40 to + 85°C | |
MTP End-Face 3D Interference Index
| Item (IEC-61300-3-30) | Minimum | Maximum | ||
| Radius of curvature (mm) | ROC-X(ABS) | 2000 | ||
| ROC-Y(ABS) | 50mm | |||
| Angle | Angle-X | -0.2° | -0.2° | |
| Angle-Y | APC | 7.85° | 8.15° | |
| PC | -0.2° | -0.2° | ||
| Fiber height (nm) | 1000nm | 3500nm | ||
| Max.DH.All Fiber: | -300nm | 300nm | ||
| DH.Adj: | -300nm | 300nm | ||
| DH.Ave Fiber: | -300nm | 300nm | ||
| Core Dip: | SM | N/A | N/A | |
| MM | -200nm | 300nm | ||
Length Tolerance
| Overall Length(L)(m) | length of tolerance(cm) |
| 0<L<1 | +5/-0 |
| 1<L<10 | +10/-0 |
| 10<L<40 | +15/-0 |
| 40<L | +0.5% x L/-0 |
Length Tolerance
| Overall Length(L)(m) | length of tolerance(cm) |
| 0<L<1 | +5/-0 |
| 1<L<10 | +10/-0 |
| 10<L<40 | +15/-0 |
| 40<L | +0.5% x L/-0 |
FAQ:
1. Are you the real factory?
Yes,we are the real factory more than 10 years
2. What is your main products?
Outdoor fiber optic cables; indoor fiber optic cables;FTTH Drop cables;
Indoor armored patch cords fiber cable; Optical patch cords SC/LC/FC/ST; MTP/MPO optical patch cord.
3. Do you have certificate for raw material?
We build long-term relationship cooperation with qualified ISO9001, ROHS raw material suppliers.
4. What is your delivery time?
Within 24 hours for normal kinds of fiber optic cable;
3~5 days for fiber optic patch cords with 10000 connectors.
5. MOQ: what is your minimum quantity?
MOQ for fiber optic cables: 1KM
There is no MOQ required for fiber optic patch cords,as there’s stock for normal kinds.
6. Do you have distributor in other country or domestic?
Until now, we sell our products to customers directly. And factory price could be offered.
7. Payment
For large orders: T/T, L/C
For small orders: T/T,Western Union and Paypal are acceptable
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.