Servo Motor Testing Machine

Price Negotiable

Price: Negotiable

MOQ: 1 set

Delivery Time: 45 working days

Brand: AIP

Product Description

Servo Motor Testing Machine, High Precision Motor Test System

1. System introduction

The low power motor testing machine adopts Linux operating system to control the software. It has both the stability of Linux system and friendly interface of Windows system, which can be used to perform the electrical parameters test for the motor of EV motor, fan, air conditioner, vacuum cleaner, power tools etc.

2. Technical parameters:

2.1 Insulation Resistance

output voltage setting range/precision	DC 500V/1000V ±(2%×setting value+10V)
insulation resistance testing range/precision	1～500MΩ ≤100MΩ:±(3%×setting value+0.5MΩ) ；>100 MΩ:±(5%×setting value+5MΩ)
insulation resistance alarm setting range	Max: 0～500MΩ; Min: 1～100MΩ
test time range/resolution	0.5～999s 0.1s/step

2.2 DC Winding resistance

testing range and precision	10.0mΩ～2KΩ ±(0.3%×display value+3 words) temperature compensation can be set.
test time range/resolution	0.5～20s 0.1s/step
temperature compensation function	Yes
temperature probe/range	DS18b20 -10.0℃~+50.0℃
precision	±0.5°C(range: -10℃~+50℃)

2.3 Direction of rotation

rotation mode: Hall/MAC/inductance
rotation	CW, CCW, still

2.4 Surge

output voltage setting range/precision	500～3000V ±(3%×setting value+8V)
sampling frequency	100MHz
waveform comparison	area, area difference, corona and phase 3 waveforms displayed in the testing interface

2.5 AC Hipot:

Output voltage setting range and precision	AC 500～3000V ±(2%×setting value+10V)
breakdown current testing range/precision	0.10～20.00mA ±(2%×setting value+0.05 mA)
Hipot current presetting alarm range	Max:0.10～20.00mA；Min:0.00～20.00mA
Hipot current/resolution	±(2% display value+0.05 mA)；0.01 mA
test time range/resolution	0.5～999.9s 0.1s/step
Arc detection	0~9 level

2.6 Low voltage start:

voltage testing range and precision	AC:30～500V ±(0.5%×display value+1 words)
current testing range and precision	AC:0.02～5.0A ±(0.5%×display value+2 words)
power testing range and precision	0.6-1500W ±(0.5%×display value+5 words)

2.7 No-load:

voltage testing range and precision	AC:30～500V ±(0.5%×display value+1 word)
current testing range and precision	AC:0.02～5.0A ±(0.5%×display value+2 words)
power testing range and precision	0.6-1500W ±(0.5%×display value+5 words)

2.8 Stall

voltage testing range and precision	AC:30～500V ±(0.5%×display value+1 word)
current testing range and precision	AC:0.02～5.0A ±(0.5%×display value+2 words)
power testing range and precision	0.6-1500W ±(0.5%×display value+5 words)

3. Test procedures

Set the test sequence and parameters range as to the stator parameters and establish a new model for this type of stator (The model of one stator type needs to be established only for the first time)
Put the tested stator on the test bench and clamp it
Sliding cover to start the test and the “in-test” indication light is on.
All the items will be tested in sequence. The operator is not allowed to touch the stator during the test.
Pass or fail signal will be triggered after completing the test.
Take out the tested stator and continue to test next one from step 2.