Die - Cast Rotor Testing Machine Software Save Parameter Comprehensive Value Test

Price Negotiable

Price: negotiation

MOQ: 1 set

Delivery Time: 45 work days

Brand: AIP

Product Description

Rotor Testing Machine For Die-Casting Rotor Of Compressor

1. Application industry: die-casting rotor of compressor

2. Technical specification:

Test object	Die-casting rotor
Test range	50mm< rotor iron core diameter<200m; 50mm<rotor iron core thickness<400mm
Test item	Broken bar, thin bar, fullness, comprehensive value
Parameter save	Software save
Control mode	Manual / auto
Judgement parameter	The quantity of conducting bar, minimum amplitude, maximum amplitude, comprehensive value
Display mode	LCD 19” display
Test mode	Continuous mode: when test is over, the machine output result, the motor continue to work to acquire inductance waveforms until press the reset button, and the machine stop testing.
Working ambient	Temperature 0~40℃,humility≤90％RH

3. Introduction

The rotor testing machine mainly test the quality die casting of rotor, which is rapid to test the failure of die casting rotor, for example: broken bar, thin bar, porosity, leakage, squirrel cage eccentricity, slot deviation, remanence, low quality of aluminum alloy.
The rotor testing machine is applicable to both laboratory and production line, which can avoid the unqualified rotor produce and outflow according to the test of die casting rotor. And it can improve the production efficiency and product quality.
Test picture

4. The influence of the rotor thin bar

The low efficiency, high temperature rise, high slip ratio and the increasing resistance are caused by the thin bar of rotor.

5. Reason of thin bar

Slot bottom conducting bar is not full of die casting due to the high speed of centrifuge
Aluminum water flow slowly caused by the small slot (in this condition, the iron core preheating temperature need to be improved).
Wrong rotor lamination, slot line is not in a line, which block the aluminum water flow.
The iron core preheating temperature is low, and the fluidity become bad when the aluminum water poured in.

6. Rotor testing machine