UF type single dust collector is the introduction of corp.U.S, a small bag with the technical level of dust collector in 80s. UF type single dust remover is economical and practical, simple and compact structure, easy installation, convenient maintenance, mainly for the top and bottom of store house, the roof and all kinds of conveyor dust emissions and dust. Color can be customized according to customer requirements. The conventional color is blue / gray

Dust containing gas inflows from the inlet into the hopper or the ash storage box, then inflows into the bag through the hole of the pattern or directly through the hole of the pattern in three ways. The dust gas is transformed into the net gas through the filter bag and enters the box, and then goes through the upper exhaust port of the box, the fan is discharged by the fan. Dust is attached to the inner surface of the filter bag and increases continuously, so that the resistance of the bag collector is constantly rising. When the resistance rises to 1500 - 2000Pa, it is necessary to clean the dust on the filter bag regularly in order to keep the bag collector working. When cleaning the dust, we first close the top fan, shake the eccentric action on the motor, drive the connecting rod, rotate the swing shaft back and forth, and the filter bag is wavy, so that the dust falls down and unloaded.