The deduster of the woodworking factory is a high efficient wood dust collector for the dust purification of the wood products industry, such as furniture, wooden door and floor. The dust remover produced by our company adopts imported inverter technology to save energy up to 30%-80%, and effectively control wood dust such as sawdust and dust during wood processing.

The dust collector in woodworking plant is simple in structure, easy to manufacture, install and maintain. Most of them are used to remove particles above.3 and M. The parallel multi cyclone dust collector has 90 to 99% dust removal efficiency for 3 m particles. The investment and operation cost of the dedusting equipment are low, and it has been widely used to separate solid and liquid particles from the air flow, or to separate solid particles from the body. Under ordinary operating conditions, the centrifugal force acting on the particle is 5~2500 times of the gravity, so the efficiency of the cyclone is significantly higher than that of the gravitational settling chamber. The mechanism of dust is the dust gas flow rotation, by centrifugal force and dust particle separation and trapping in the wall from the air, with the gravity of the dust particles into the hopper. The cyclone is composed of cylinder, cone, inlet and exhaust pipe, and has simple structure, easy to manufacture, install and maintain. Wood dust removal has been widely used to separate solid and liquid particles from airflow or to separate solid particles from liquid.