Diamond V Holder And Diamond Cutter Commutator Surface Lathing Machine WIND-CT-TH4

Application:

Small fractional horsepower motor armatures, starter armatures commutator,

The commutator turning process is a important motor manufacturing procedure always after welding 

Advantages:

The horizontal and vertical feeds are all Delta servo-controlled, high efficiency, and good stability,

especially suitable for turning face commutator. It is the advanced precision equipment for turning the

commutator outside surface.

1. With two servo axis,

   X axis control the length of turning left right horizontal position

   Z Axis control the depth of lathing in vertical position

2. Can turn the commutator OD and riser OD of automotive armature

Specification:

1. Roundness < 0.003mm

2. Surface roughness

3. Armature OD 20~80mm

4. Shaft length:32~250mm (If longer need custom made)

5. Shaft Diameter: 2~18mm (can be custom made)

6. Commutator OD: 4.3~60mm

7. Stack OD: 20~110mm

8. Cutting amount:Rough cut Max0.20mm

9. RPM modulate: 0~60Hz

10. Cutter unit: 1um~0.5mm and speed adjustable

11. Cutting length:Max50mm

12. Cutting times: X axis can be setted up to 4times, Z axis 4times can be setted up to 4times

13. Air source: 5~7 MPa

14. Power source 220V 50/60Hz

15. Machine Power: 2.5kw

Question and Answer:

1. Is it possible to process both type of armatures using one machine,or it requires different

   tooling?

Please click below link to view the video

https://youtu.be/6IjY1ey-qr0