Delta Servo Motor Controlled Commutator Turning Surface Lathing Machine WIND-CT-TH4

Application:

Small fractional horsepower motor armatures, starter armatures commutator,

The commutator turning process is a important motor manufacturing procedure always after welding 

Advantages:

1.This machine's cutter movement and turning are controlled by Delta servo motor device.

2. This machine's main standard parts are imported parts.

3. This machine is controlled by two-axis servo motor through ball screw precision control longitudinal

    feed, first rough turning, then precise turning, the number of cutting can be set on the touch screen

    can be arbitrarily set (4 times in total) and each feed Value (minimum accurate to 1um).

Specification:

1. Roundness < 0.003mm

2. Surface roughness

3. Armature OD 20~80mm

4. Shaft length:32~250mm (If longer need custom made)

5. Shaft Diameter: 2~18mm (can be custom made)

6. Commutator OD: 4.3~60mm

7. Stack OD: 20~110mm

8. Cutting amount:Rough cut Max0.20mm

9. RPM modulate: 0~60Hz

10. Cutter unit: 1um~0.5mm and speed adjustable

11. Cutting length:Max50mm

12. Cutting times: X axis can be setted up to 4times, Z axis 4times can be setted up to 4times

13. Air source: 5~7 MPa

14. Power source 220V 50/60Hz

15. Machine Power: 2.5kw

Question and Answer:

1. Is it possible to process both type of armatures using one machine,or it requires different

    tooling?

Please click below link to view the video in an automatic line

https://youtu.be/whFKJWcw0lg