Flicker Free Indoor 10mm Stadium Led Sport Perimeter Screen Display High Refresh Rate 1920Hz
 

 
Mechanical

• Quick-changeable modules. Module / cabinet change time <1 min, without affecting running system – i.e. hot-swappable.
• Mechanism for access gates at several locations (if required), with no signal interruption.
• Mechanical connectors to align the system, and minimise gaps between cabinets.
• Black non-glare finishing on face-plate, and black/dark neutral colours on cabinet.
• Weather-protection to IP-65 (front) and IP-54 (back) standard. 

• Rubber louvers front and top to protect cabinets from impact and players from injuries
• Transport casing designed for efficient storage and shipping (for transportable systems).

Electrical

• European-voltage system (220-240V, 50Hz).
• Single-PSU-failure tolerant concept.
• Heavy, high flex rubber cabling for outdoor use.
• EMC protection to highest EU standards and regulations.

Content Control / Data Interfacing

• Individual control of brightness, gamma, colours of every single pixel/ module/cabinet.
• Default graphics (auto-switch feature) installed and enabled (set to static shared-rotation) in case of total data connection loss with server.
• System viewed and operated as one single screen by control software.
• Control signal connection via two redundant feeding points. Fibre optic data cabling from dedicated controller locations to the two return side corners.
• Data ring loop configured; if one connection fails an automatic switch activates data source from the opposite section.