DIN EN50022 Din Rail Energy Meter Compliant With Pulse Output ISO9001
Single Phase Din Rail Energy Meter, 1P Smart Electric Meter kWh High Quality Power Meter
Model EM015S single phase electronic DIN rail active energy meter is a kind of new
style single phase two wire active energy meter, it adopts micro-electronics technique
and imported large scale integrate circuit, and uses advanced technique of digital and
SMT techniques, etc. It has its completely independent intellectual property rights and
minimum size. It has already passed the test of the international authority KEMA. The
meter completely accords with relevant technical requirements of class 1 single phase
active energy meter stipulated in international standard IEC 62053-21. It can accurately
and directly measure 50Hz or 60Hz active energy consumption from single phase AC
electricity net. This meter has white backlight source eight digits LCD displays shows
the active energy consumption. It has following features: good reliability, small volume,
light weight, specious nice appearance, convenient installation, etc.
- 35mm standard DIN rail installation, complying with standard DIN EN50022.
- Single pole width (Modulus 17.5mm), complying with standard DIN43880.
- Standard configuration 7+1 digits display (9999999.1kWh) by white backlight source LCD. May select7+1 digits display (999999.1kWh) without backlight source general LCD, (product Configuration code is SE).
- Standard configuration pulse output passive (polarity),May select distant pulse output passive
- (Nonpolarity). And contact with all kind of AMR system conveniently,complying with standard IEC 62053-31 and DIN 43864.
- Bicolor LED instructions power supply state (green) and signal of energy impulse (red).
- Automatic detection the direction of the flow of load current. And Instructions on LED (when display HELP 1 on LCD, that is meaning the direction of the flow of load current reverse).
- Single direction measurement single phase two wire active energy consumption. It is nothing with direction of the flow of load current. Complying with standard IEC 62053-21.
- Directly connect operation, there are two types wiring you may select. Standard configuration type S wiring, may select type U wiring (Product Configuration code is UD).
- Extension terminals cover,in order to protect to use safety.
| Model | EM015S |
| Accuracy | 1.0 |
| Reference Voltage(V) | 127V,230V |
| Current Specification(A) | 5(30)A |
| Starting Current(A) | 0.02A |
| Insulation performance |
AC voltage 4kv for 1 mimute, 1.2/50us waveform impulse voltage 6kv |
Production picture
1 Where is your factory?
Our factory is located in Xinguang Industry Zone, Liushi Town, Yueqing City, Zhejiang Province, 325603 China.
2 Are you manufacturer or business?
We are manufacturer established in 2002, and have over 16 years production experience.
3. Can I ask for samples?
Yes
4. What's the warranty of your products?
18 months
5. What's the lead time?
Depend on the quantity and model of the order, normally it takes around 2-3 days, but the exact lead time should be discussed with our sales.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.