The flat power supply unit for distribution boards

Small. Clever. LOGO!Power

Small. Clever. LOGO!Power: Thanks to its stepped profile design, the LOGO! 8 product line is ideally suited for installation in small distribution boards. The stabilized power supplies with a wide range input of 100 … 240 V AC (85 … 264 V) and110 ... 300 V DC are available in two performance classes with an output voltage of 5 V and 15 V, in three performance classes with 12 V and in four performance classes with 24 V. The 12 V and 24 V versions are ideal for supplying LOGO! controllers with the corresponding voltage input. The high level of efficiency across the entire load range as well as the low no-load losses result in lower overall energy consumption. Greater convenience when commissioning and servicing thanks to the integrated current monitor. The extended temperature range from -25 °C to +70 °C enables a host of additional applications.

To further increase 24 V availability, the 24 V LOGO!Power power supply units can be combined with DC-UPS, redundancy and selectivity modules.

LOGO!Power is the ideal choice when components need to be supplied with DC voltage. It can provide currents up to 4 A. This mini power pack can be used regardless of industry, e.g. in building technology applications for light and heating controllers or for access control systems. LOGO!Power is also well-suited for use in industrial automation, such as in packaging machine, machine tool, conveyor belt or sorting system applications.

Main product highlights

• Low width
  with minimum of 18 mm to maximum of 72 mm, thus requiring very little space in the control cabinet or distribution board
• High energy efficiency
  with efficiency levels of up to 90% over the entire power range and ERP-compliant no-load losses of < 0.3 W
• Global use
  due to operating temperature range from -25 °C to +70 °C and international certificates
• Load monitoring
  due to real-time measurement of the output current without disconnecting the cable, i.e. without interrupting the DC supply
• Flexible mounting
  with standard rail or wall mounting in different installation positions
• Broad portfolio
  including 11 devices with 5 V, 12 V, 15 V and 24 V DC up to 100 watts (new: 12 V/0.9 A and 24 V/0.6 A)
• Flexible operation
  in all standard 1-phase supply networks thanks to wide range input of 100 … 240 V AC without switchover and operation on DC networks with 110 … 300 V DC
• Reliability
  due to problem-free connection of loads with high inrush currents thanks to power reserve when starting up as well as constant current in the event of overload
•