Specifications:
1. Length × width × height: 8.2m × 1m (1.9m for the motor) × 1.3m
2. Equipment rack: 350H steel
3. Host medium board: 20mm
4. Host chain: 2 inches
5. Host power: 11kw
6. Pump station power: 4kw
7. Molding shaft: diameter 80mm (solid)
8. Leveling part: five-roll leveling (upper 2 down 3), two rolls supply material, 45# seamless steel pipe
9. Mold wheel: All bearing steel materials are forged; lathe finishing and quenching heat treatment, which greatly improves the hardness of the mold.
10. Adjusting spacer: using 45# steel pipe and well finished, surface galvanized, wire cutting and latched.
11. Number of rows: 12 rows (trumpet type equipped with 13 rows)
12. C-shaped steel model: 80mm~300mm can be adjusted by any model.
13. Plate thickness: 1.5mm~3.0mm
14. Purlin outgoing speed: 8-15 m / min
15. Equipment weight: about 4.5 tons
16. Model replacement method: Adjust the external nut to replace model of the main unit.
17. Cutting method: fully automatic stepless cutting with punching
18. Shearing volume: length 1.3 meters, width 1.0 meters, height 1.6 meters Weight: about 0.8 tons
19. Cutting principle: hydraulic cut-off, equipment powered by 3 phases of electricity, fully automatic computer control, automatic forming and cutting, equipment equipped with three crystal inverter which can enable stable voltage and protect motor as well as counting accurately.
20. The equipment is provided with a set of feeding racks and a set of receiving racks free of charge.
21. Steel roll feeding size = bottom width + 2 waist height + one small side (20mm) - 5mm
22. Warranty period: two years