1450nm-1920nm Infrared Fiber Coupled Laser Diode 2 Pin / 9 Pin Package

1450nm-1920nm Infrared Laser Fiber Coupled Laser Diode 2-Pin/9-Pin Package Most Powerful Laser Diode
Product Details​:

Model Number: XLP-1450~XLP-1920

Type: Multi Mode Fiber Coupled Laser Diode

Wavelength: 1450nm-1920nm

Fiber Type: MMF

Fiber Core: 105um

Package Type: 2-Pin/9-Pin

Connector: FC

Product Specifications: 

Precautions:

1. The laser light emitted by the laser diode may cause damage to human eyes. When the diode is working, it is strictly forbidden to look directly at its end face, not to look at the laser through the lens, or to use laser protective glasses.
2. The laser diode needs a suitable drive power supply, the instantaneous reverse current cannot exceed 2uA, and the reverse voltage cannot exceed 3V, otherwise the device will be damaged.
3. The laser diode should be stored or worked in a clean environment.
4. Working at a higher temperature will increase the threshold current, lower the conversion frequency, and accelerate the aging of the device.
5. If the output power is higher than the specified parameters, it will accelerate the aging of the components.
6. The laser diode needs to fully dissipate heat or be used under refrigeration conditions. The temperature of the laser diode is strictly controlled below 20 degrees to ensure its life.
7. The diode is an electrostatic sensitive device, which can only be use when the human body is in good condition. Anti-static can use an anti-static bracelet.
8. The output wavelength of the laser is affected by the working current and heat dissipation. It is necessary to maintain good heat dissipation conditions and reduce the temperature of the laser diode during operation.