2000*2500mm Glass Washing And Drying Machine For Processing Insulating Glass
Automatic Vertical Glass Washing Machine
LJBQX glass washing machine is a vertical washing machine, used for washing all kinds of glass, Low-E glass. The washing machine is divided into three sections, 01 transfer section, 02 washing and drying section, and 03 inspection transfer section. The washing machine has a low-e film detection function, and the Low-E film can be detected by the coating detection mechanism. The brushes are all soft brushes. The wind knife can be adjusted according to different glass sizes. High-speed washing is clear. The washing speed can be directly displayed on the touch screen.
Details introduce of the glass washing machine
• 01 transfer section
Coating detection mechanism, automatic detection of offline Low-e film
• 02 washing and drying machine
Main feature:
• Clean low-e glass with 6 0.1mm soft bristles and soft bristles
• Pre-cleaning (optional)
• The new air knife adopts an aluminum profile (Duckville air knife), and the size of the exhaust port is adjusted by the aluminum profile Duckville. This reduces the number of adjusting screws, prevents each screw from loosening, and avoids air knife resonance.
• The air knife can automatically adjust the width of the air knife according to the thickness
• The operation box with the cleaning speed display can accurately display the cleaning speed (8-10m).
• Automatic temperature control and water supply system for water tanks
• European noise reduction system
• Stainless steel material
• 03 checking and discharge section
• Using LED lights to check if the glass is washed clean or not, if the glass is not clean, it will alarm.
Main specification:
Max glass size : 1800*2000mm / 2000*2500mm/ 2500*3500mm (can be optional)
Min glass size : 400*280mm
Glass thickness: 3 - 18mm
Glass with low-e film : Yes
Numbers of brushes : 6 pieces
Brushes' quality: soft brushes ( can wash low-e glass) with 0.1mm diameter
Brushes' motors: 3 motors
Air knife: adjustable
Washing speed : winter 6 - 7m, sumer 8 - 10m
Front and rear Pushing wheels: with power
Washing speed : can be displayed on the screen
Warranty: one year
Machine brand: LIJIANG GLASS
Country of original: Made in Jinan, China
| Max. glass size | 2000mm*2500mm |
| Min. glass size | 280mm*450mm |
| Glass thickness | 3-15mm |
| Glass washing speed | 2-10m/min |
| Glass conveyor speed | 45m/min |
| Washing brushes | 3 pairs of soft brushes with 0.1mm hair |
| Water supply | Water consumption:0.5t/h conductivity:40μs/cm |
| Air supply | Flow: 0.8m/min |
| Total power | 18kw |
Related Product of LIJIANG GLASS
Horizontal Glass Washing Machine With 2500Mm Width Or 2600Mm Width
CP-2500A (12 m/min) glass washing machine technical parameters
1, USES:
glass washing machine CP-2500A used for cleaning and drying the upper and lower surfaces of ordinary plate glass and high quality low-e glass,it is composed of incoming segment, cleaning air-drying segment and outgoing segment.
2, Structural characteristics:
1. Aluminum alloy assembly structure, no scrap concept, permanent use,
High efficiency, energy saving of 70% efficiency.
2. All remaining sheet metal parts are made with advanced mechanical spray
Paint or powder;
3. The rubber roller uses vulcanized rubber and stainless steel shaft.
4. The cleaning part that comes in contact with water is made of stainless steel.
5. In the cleaning department, the wind staff lifts up and down as a whole. The maximum lift is 350 mm, which is convenient for cleaning and maintenance.
6. Three pairs of brushes (Ø150mm) stainless steel shaft construction (Low-E glass, regular coated glass, daylight coated glass can be cleaned without damaging the coated surface).
7. Two sets of special stainless steel aluminum alloy air knife configuration, strong wind, good drying effect, with heating system (with temperature control, opening and closing is optional).
8. The fan is equipped with an air filter in the air inlet chamber, which has a large amount of air and has a good air drying effect. The entire windbox is located at the top of the workshop and has air filters on the sides for easy inspection and cleaning.
9. The main drive gear is driven by frequency conversion and digital display. The rotation of the brush roller in the cleaning section is driven by the independent belts of the upper and lower motors. With stable frequency conversion speed adjustment and long service life, it is possible to clean special glass that is in high demand.
10. Mechanical button control, washing machine digital display, easy operation, easy operation, and convenient maintenance.
11. The washing machine's aquarium is installed outdoors, which is convenient for cleaning, replacing and inspecting the aquarium, and the washing effect of the washing machine will be cleaner.
12. PLC control and touch screen display are optional, convenient for operator operation and maintenance, and can be tightly connected to edge grinders from various manufacturers. (Must be purchased separately)
3, Technical parameters:
1. Maximum glass width: 2500mm (effective maximum: 2650mm)
2. Minimum glass specifications: 400 mm x 400 mm (limited to left and right single rows)
3. Glass thickness: 3mm-25mm (digital display)
4. Speed range: Glass thickness is 3-25mm Vmax = 1-12m / min
5. Main drive and electric brush speed adjustment mode: Frequency conversion speed adjustment
6. Workbench height: 900 ± 25mm
7. Total power: 42KW (Flood control air heat: 15KW)
8. Water sources: self-circulating, tap water (according to private water standards), and deionized water supplements (deionized water equipment must be provided by the purchaser)
9. Power supply: 380V 50Hz
10. Dimensions (length x width x height): Approximately 6260 x 4800 x 3100
11. Weight: Approximately 3940kg
| Maximum glass width | 2500mm (effective maximum: 2650mm) |
| Minimum glass specification | 400mm×400mm (limited to single row on left and right sides) |
| Glass thickness | 3mm-25mm (digital display) |
| Speed range | glass thickness within 3-25mm Vmax=1-12m/min |
| Main drive, brush speed regulation method | frequency control |
| Table height | 900±25mm |
| Total power | 42KW(water-bearing wind heating: 15KW) |
| Water source | self-circulation, tap water (according to civil water standards) and deionized water water supplement (deionized water equipment shall be provided by the buyer) |
| Power source | 380V 50Hz |
| Dimensions (length × width × height) | approximately 6260*4800*3100 |
| Weight | 3940kg |
4, Origin of motor and main accessories:
| Main drive motor | Zhejiang province |
| Brush motor | Zhejiang province |
| High pressure air blower | Guangdong province |
| The water pump | Shanqing |
| brush | Anhui province |
| Rubber roller | Guangdong province |
| Frequency converter | VEICHI/Rexroth |
| Electric parts | Schneider |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.