X2CrNiMo18-14-3 Stainless Steel 1.4435 EN1092-1 Type 01 Slip on Plate Flange
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
X2CrNiMo18-14-3 EN1092-1 Type 01So Flanges - Stainless Steel DIN 1.4435 Slip On Flange
Material Specifications
| Grade | X2CrNiMo18-14-3 |
| Number | 1.4435 |
| Classification | Austenitic stainless steel |
| Density | 8 g/cm³ |
Applicable Standards
- EN 10088-2:2005 - Stainless steels - Technical delivery conditions for sheet/plate and strip
- EN 10088-3:2005 - Stainless steels - Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products
- EN 10028-7:2007 - Flat products made of steels for pressure purposes - Stainless steels
- EN 10222-5:2000 - Steel forgings for pressure purposes - Martensitic, austenitic and austenitic-ferritic stainless steels
- EN 10216-5:2014 - Seamless steel tubes for pressure purposes - Stainless steel tubes
- EN 10217-7:2005 - Welded steel tubes for pressure purposes - Stainless steel tubes
- EN 10296-2:2005 - Welded circular steel tubes for mechanical and general engineering purposes - Stainless steel
- EN 10253-3:2008 - Butt-welding pipe fittings - Wrought austenitic and austenitic-ferritic stainless steels
- EN 10253-4:2008 - Butt-welding pipe fittings - Wrought austenitic and austenitic-ferritic stainless steels
- EN 10272:2007 - Stainless steel bars for pressure purposes
- EN 10250-4:2000 - Open steel die forgings for general engineering purposes - Stainless steels
- EN 10297-2:2005 - Seamless circular steel tubes for mechanical and general engineering purposes - Stainless steel
- EN 10088-1:2005 - Stainless steels - List of stainless steels
- EN 10088-5:2009 - Stainless steels - Technical delivery conditions for bars, rods, wire, sections and bright products
- EN 10088-4:2009 - Stainless steels - Technical delivery conditions for sheet/plate and strip
Chemical Composition
Particular ranges of sulphur content may provide improvement of particular properties. For machinability a controlled sulphur content of 0.015% to 0.030% is recommended and permitted. For weldability, a controlled sulphur content of 0.008% to 0.030% is recommended and permitted. For polishability, a controlled sulphur content of 0.015% max is recommended. Elements not listed in this table shall not be intentionally added to the steel without the agreement of the purchaser except for finishing the cast.
| Element | Content (%) |
|---|---|
| C | max 0.03 |
| Si | max 1 |
| Mn | max 2 |
| Ni | 12.5 - 15 |
| P | max 0.045 |
| S | max 0.015 |
| Cr | 17 - 19 |
| Mo | 2.5 - 3 |
| N | max 0.11 |
Mechanical Properties
Tensile Strength (Rm) - MPa
| +A Condition | 490-700 |
| +AT Condition | 490-690 |
0.2% Proof Strength (Rp0.2) - MPa
| +A Condition | 190-240 |
| +AT Condition | 190-200 |
Impact Energy (KV) - J
| Transverse, +A Condition | +20°C: 60 | -196°C: 60 |
| Longitudinal, +A Condition | +20°C: 100 |
Elongation at Fracture (A) - %
| +A Condition | 30-45 |
| Longitudinal, +AT Condition | 40 |
Brinell Hardness (HB)
| +A Condition | 215 |
| +AT Condition | 200 |
Material Properties
- Resistance to intergranular corrosion: in the delivery condition - yes; in the sensitized condition - yes
- Steel shall not be applied at a metal temperature lower than -270°C
Equivalent Grades
Warning! Only for reference
| EU EN | USA | Germany DIN, WNr | Japan JIS | France AFNOR | England BS | Italy UNI | China GB | Sweden SS | Czechia CSN | Finland SFS | Russia GOST | Inter ISO |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| X2CrNiMo18-14-3 | 316L TP316L |
X2CrNiMo18-14-3 | SUS316L | Z3CND17-12-03 Z3CND18-14-03 |
316S13 316S14 |
X2CrNiMo17-13 | 00Cr17Ni14Mo2 | 2353 | 17350 | 752 | 03KH17N14M3 | Type19a |
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
BEST PIPELINE EQUIPMENT CO.,LTD
Location
China Factory : Suzhou Industrial Park, JiangSu Province,China
Contact Person
amy