9T Transmission Line Stringing Equipment , 5km/H Correspending Tension Stringing Equipment
Transmission Line Equipment Hydraulic Puller-Tensioner Equipment 9T with imported Engine
Structure Parameter
| Bottom diameter of tension wheel groove | 1500mm |
| Trial traverse diameter | 40mm |
| Total weight | 4600kg |
| Boundary dimension | 4700×2300×2700mm |
Performance Parameter
| Maximum intermittent tension | 90KN |
| Maximum pull | 90KN |
| Maximum sustained pull | 44KN |
| Correspending speed | 5km/h |
Main Configuration Instructions
| Engine | imported |
| Reduction gear | German Rexroth |
| Hydraulic motor | German Rexroth |
| Pressure gage | German |
| Pressure pump | German Rexroth |
Engine
| Feeding | diesel |
| Cooling system | water |
| Electric system | 24V |
Product Introduction
Hydraulic puller-tensioner GX90TP designed to operate either as a tensioner and a puller, fit to string one or two ropes or conductors.
Two hydraulic circuits let to tension at constant force even varying the speed of stringing.The two circuits can be used independently or simultaneously, with automatic partition of the forces.
- < > pairs of steel capstans lined with multi-grooved nylon sectors.
Device to control low-force tensioons(3-25KN), fit for OPGW cables, with idle position.
-
Chassis with rigid axle, manual brake and detachable drawbar for towing at low speed in workplace.
-
Stabilisers, share and attachments for anchoring the machine.
-
Oil cooling system.
-
Two auxiliary hydraulic circuits for additional equipment.
-
Grounding connection point.
 |
 |
 |
 |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.