Complex Switch Latching Relay 100A For Energy Meter / Automatic Control Equipment
Latching Relay 100A Part No. CY-JMD-12V11 for energy meter Automatic meter reading system Complex switch
1.Part Number Description
2.Character
Meet to IEC62055-31-2005—UC2 UC3
Meet the requirements of anti-frequency magnetic field and magnetic interference in the national network.
According to RoHS requirements
Large switching power with mini body
Big strengthof magnetic latching power,anti-shock of vibration
Pulse drive,economy of power consumption and no heat rising
Permanent magnetic strength to keep stability,and save power consumption
Small contact resistance ,and little self-consumption with reliable working
3. Application
Electronic energy meter
Automatic meter reading system
Lamp controller
Complex switch
Home appliance and automatic control equipment
4.Coil Specification
| Rated voltage | Action voltage (VDC) | Max coil voltage(V) | Coil resistance x(1±10%)Ω | Rated power | |
| Single coil | Double coil | ||||
| 6 | 4.8 | 12 | 24 | 12+12 |
Single coil 1.5W
Double coil 3W |
| 9 | 7.2 | 18 | 54 | 27+27 | |
| 12 | 9.6 | 24 | 96 | 48+48 | |
| 24 | 19.2 | 48 | 384 | 192+192 | |
| 48 | 38.4 | 96 | 1536 | 768+768 | |
5.Technical Specification
| Contact type | 1B(1A) | Insulation resistance | ≥1000MΩ(500VDC) | |
| Contact material | AgSoO2 | Dielectric strength | Coil--contact | ≥4000VAC 1min |
| Contact--contact | ≥1800VAC 1min | |||
| Contact load (resistance) | 100A 250VAC | Action time | close | ≤20mS |
| open | ≤20mS | |||
| Contact resistance (mΩ) | ≤2mΩ | Action impulse duration | 50mS-240mS | |
| Max switching voltage | 250VAC | Life (time) | Electrical life(ops) | 1x 104 (circle) |
| Mechanical life (ops) | 1x 106 (circle) | |||
| Max switching current | 100A | Max action frequency | 1200 ops/h | |
| Max switching power | 25KVA | Vibration tolerance | 98m/s2 | |
| Short time impact current |
3000A 10ms no sinter 6000A 10ms no explosion |
Shock tolerance | 10-50Hz 1.0mm | |
| Ambient temperature | -40℃ to +70℃ | Relative humidity | 90% RH 40℃ | |
6.Dimension
7.Wiring Diagram
Remarks:
The drawing does not show tolerance. It is subject to below range:
≤1mm ±0.2
1-5mm ±0.3
≥5mm ±0.4
The output terminal in above drawing is for customers’reference only. The dimension and connection way of output terminal can be customerized.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.