35KV 800A Indoor GIS Plug In Bushing EN 50180-50181 Cross Section 50-240mm

1. Introduction:

Plug-in Termination Kits is suitable for GIS incoming and outgoing wire connection. It is designed to mate with epoxy insulated bushing, and connect wire to switchgear fully shielded, fully insulated, fully sealed. Your technician can install, repair or maintain equipment and power cable system without undermining seal between bushing and GIS.
Meets the standard of EN50180-50181 interface type 2#, 

2. Packing:

Termination housing

Locking halves

Protection cover

Cable Sheath Braided Ground Wire

CFS

Wipers
Installation instruction

Silicone Grease

Certificate

3.Structure:

1.Epoxy Insulated Bushing

2.Locking Halves

3. Stress Relief Cone

4. Plug-in termination kit

5. Protection cover

6. pressure spring

7. Cable sheath

8. Grounding Wire

9. Cable Cable not included

4. Parameters:

5. Selection Table:

Model Option: