Three Phase Environmental Test Chamber / Temperature And Humidity Test Chamber
Equipment Summary:
The ZL-6019 High and Low Temperature Test Chamber tests material properties in high and low temperature environments. Designed for electrical and electronic products and their components, this equipment simulates environmental conditions to evaluate material performance and physical characteristics at extreme temperatures. Testing determines whether products maintain intended performance requirements under specified conditions.
- GB 10589-89 low temperature testing condition
- GB 10592-89 high temperature testing condition
- GB 11158-89 high temperature testing condition
- GB/T5170.2-1996 basic parameters of environmental testing method for Electrical and electronic products
- GB2423.1-89 The basic test regulation for electrical and electronic products, Test A: low-temperature test method
- GB2423.2-89 The basic test regulation for electrical and electronic products, Test B: high-temperature test method
- The basic test regulation for electrical and electronic products, Test: high-low-temperature test method
Applied to test product quality across multiple sectors including electronics, plastic products, electrical appliances, instruments, food, vehicles, metals, chemicals, building materials, aerospace, and medical care.
| Model | ZL-6019 High And Low Temperature Test Chamber |
|---|---|
| Inner size D*W*H | 40*50*40 cm | 40*50*50 cm | 50*60*50 cm |
| Temperature Range | -40°C to 150°C |
| Temperature Fluctuation/Uniformity | ≤±0.5°C / +2°C to 3°C |
| Heating-up Time | -40°C to 100°C about 55min |
| Cooling Time | 25°C to -70°C about 80min |
| Controller | LED digital P,I,D, +S,S,R.microcomputer controller |
| Accuracy | Setting accuracy temperature ±0.1°C, directed accuracy temperature ±0.1°C, resolution ±0.1°C |
| Sensor | Platinum resistance PT100Ω/MV |
| Heating System | Independent system, nickel-chromium alloy electric heating type heater |
| Cooling System | Totally enclosed air-cooled single-stage compression refrigerate mode / original from French "Taikang" / totally enclosed air-cooled re-compression refrigerate mode |
| Circulatory System | Temperature, low-noise, air-conditioning-type motor. Multi-vane centrifugal wind wheel |
| Outer Material | High-quality carbon steel plate. Phosphide electrostatic spray treatment / SUS304 stainless steel hairline treatment |
| Inside Material | SUS304 High-quality stainless steel light board |
| Insulation Material | Rigid polyurethane foam, ultra-fine glass fiber cotton |
| Insulation | Double-resistant high-temperature aging of silicone rubber seal |
| Standard Configuration | Multi-heated glass window attached lighting, testing product shelf 2 pcs, test leads holes (25,50 mm) 1 pcs |
| Protection Systems | Leak current, short circuit, over temperature, motor overheating, over-pressure compressor, overload, over-current protection |
| Timer | 0.1 to 999.9 (S,M,H) adjustable |
| Voltage | AC380V±10%, 50±0.5Hz Three-phase five-wire system |
| Environmental Temperature | 5°C to 30°C ≤85% R.H |
Annotation:
a. Above data were measured at temperature (QT) 25°C and no-load condition.
b. Can be customized non-standard-type high-low-temperature testing machine according to user requirements.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.