Fully Automatic Shrinkage Tester , Test The Dimensional Stability Of Textiles After Washing.
Fully Automatic Shrinkage Tester , Test The Dimensional Stability Of Textiles After Washing.
Description Of Goods:
Applicable Range:
Used for testing the dimensional stability of fabrics, clothing and other textiles after washing.
Relevant Standards:
GB/T8629 GB/T8630 ISO6330/5077 FZ/T70009 Bs4923 EN25077/26330 JIS L1909 M&S IWS etc.
Instrument features:
1.Imported stepless frequency conversion motor, up to the high dehydration factor.
2.Built-in sets of standard procedures, to support the personalized programming, and provide program memory.
3.Floating gall-tube structure, no foot installed.
4.All stainless steel, industrial design.
Technical parameters:
| Type | Front door feeding, horizontal drum |
| Inner cylinder |
Diameter, (520 ± 1) mm Depth, (315 ± 1) mm Net volume, 61L Lifting wing: number, 3 height, (53 ± 1) mm length, extending to the inner tube at the bottom of the sheet and the angle between the 120 ° |
| Outer cylinder | Diameter, (554 ± 1) mm |
| Cylinder speed |
Washing, load and water (52 ± 1) rpm Dehydration, low speed (500 ± 20) rpm High speed (800 ± 20) rpm |
| Water level control | 1 ~ 20cm, digital settings |
| Temperature control | Room temperature ~ 99 ℃, digital settings |
| Heating power | 5.4KW |
| The rotation action |
Normal rotation time interval: (12 ± 0.1) s Normal stop time interval: (3 ± 0.1) s Moderate rotation time interval: (8 ± 0.1) s Mitigation stop interval: (7 ± 0.1) s Soft rotation time interval: (3 ± 0.1) s Soft stop time interval: (12 ± 0.1) s |
| Water supply system |
Water supply flow (20 ± 2) L / min (inlet water supply pressure should be higher than 150 kP conditions) Water level detection 2 files 100mm and 130mm (tolerance ≤ 3 mm) Drainage rate> 30 L / min |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.