ASTM D3939 ICI Hammer Type Fabric Snagging Tester with 4 Work Stations
ASTM D3939 ICI Hammer Type Fabric Snagging Tester with 4 Work Stations
Brief introduction:
It can quickly detect how easy it is for the fabric to hook under normal wearing conditions (i.e. the yarn is hooked out of the fabric).
Principle:
The cylindric sample is covered on the rotating cylinder, and the chain hanging hammer is placed on the surface of the sample.When the cylinder rotates at a constant speed, the hammer randomly turns and jumps on the surface of the sample, and hooks the sample to produce hooks on the surface of the sample.After a specified number of revolutions, the sample's hook degree is rated by comparing with the standard sample.
Applicable standard: GB/T 11047 ASTM D3939 JISL1058
Technical indicators:
| Number of working stations | 4 |
| Revolving barrel size | DiameterΦ82mm (including 3mm thickness of outsourcing rubber), 210mm width |
| Rotation number of rotating drum | 60±2r/min |
| Total mass of nail hammer | 160±10g (including equidistant implantation of 11 studs) |
| Stitching needle | Exposed length 10mm, tip radius: R0.13mm |
| Fixed guide rod | working width 125mm, diameter 10mm |
| Distance between nail hammer and guide rod |
45mm
|
| Power supply | AC220V;50Hz |
| External dimension | 910mm×360mm×460mm |
| Weight | 50kg |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.