Floor Type Automatic Flexo UV Ink Proofer

Functional structure description:

The pressure of the ceramic anilox roller and the printing plate is adjustable, the adjustable range is plus or minus 1mm, the front rotating handle is adjusted, and the adjustment value is displayed on the screen.

The pressure of the printing plate and the impression cylinder is adjustable, the adjustable range is plus or minus 1mm, and the left and right sides of the screen can be directly adjusted.

Multi-speed structure of proofing speed, respectively 10m/min, 20, 30, 40, 50, 60, 70, 80, 90, custom

Inking method: anilox roller + scraper + ink fountain. The scraper can be easily taken out, and the ink fountain can be opened and cleaned easily.

Electrical configuration: two sets of servo motors, one set of frequency conversion motors, one PLC, one 7-inch touch screen, one switching power supply, two sets of stepping motors, etc.

In addition, customers need to configure their own compressed air source: 0.4~0.6MPa (self-purchased small compressor or use environment with central air source supply.)

Technical parameters:

1. Power: 1500W 220V50HZ

2. Input power: AC220V 50-60HZ

3. Outsize L*W *H: 740X408X1045mm

4. Proofing material size: 220X180mm

5. Thickness range of proofing material: 0.01-1mm bendable material

6. Ceramic mesh roll specifications: diameter 70mm, length 220mm,

7. Quantity: one

8. Installation method of ceramic mesh roll: easy to disassemble and install

9. Plate roller specifications: diameter 84mm, length 220mm, can customize it

10. Resin plate size: 220X180mm

11. Plate roller specifications: diameter 84mm, length 220mm

12. Net weight:87KG

Machine Detail