PLC Roll Forming Machine Cold Rolled Sheet Shelf Heavy Column Machine
Cold Rolled Sheet Shelf Heavy Column Machine 14m/min-16m/min Speed with PLC
Our factory has more than 20 years of experience in roll forming machines. We have our own design team and R & D team, producing different types of roll forming machines with automated production and simple operation. 24-hour online technical support, local engineer technical support, global after-sales service.
Working flow
Decoiler----Feeding+Leveling(upper three rollers, down four rollers)----Roll forming----Hydraulic Cutting----PLC----Output table
Automatic Uncoiler with press arm and control box
Tensioning method: hydraulic tensioning
Coil width: 600mm
Uses: used to support the steel coil and unroll the coil in a rotatable manner.
Load capacity: 5T
Inner diameter: 508 ± 30mm
Emergency stop device
Main forming machine
The material of the main shaft: 45 # steel, adjusted
Hydraulic system and computer control cabinet
Hydraulic oil: 40 #
The hydraulic oil enters the hydraulic oil tank, and the pump drives the cutting machine to start cutting.
Encoder: Automatically adjust the cutting method, number of cuts, and count automatically, without manual counting.
PLC: European brands ---- Siemens, Schneider
Cutting: It uses the hydraulic drive and automatic positioning to size and cut the target product.
Cutting blade material: Cr12MoV, quenched, hardness reaches 58-60 °
Main power: 380V / 50HZ / 3PH
Product parameters:
| No. | Main parameter name | Feature |
| 1 | Forming station | 30 station |
| 2 | Roller material | High-grade GCr15 material, heat treated |
| 3 | Heat treatment | All roller dies have been heat-treated to reach HRC = 58-60° |
| 4 | Spindle material | 45 # steel, quenched and tempered |
| 5 | Memorial arch structure | A3 board integral archway 30mm thick |
| 6 | Transmission way | Chain drive, all chain sprockets are processed by high frequency |
| 7 | Transmission power | 15kw national standard copper core motor, JZQ350 gear reducer |
| 8 | Frame structure | H400 type steel by welding |
| 9 | Cut off method | Hydraulic automatic mold cutting |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.