KUB800 Made in China chiller compressors 8HP display chiller price
| Product name | Air cooled chiller | Horsepower | 8HP | Original | Made in China | Brand | KUB |
Specifications
| No. | Specification Parameter | Description | No. | Specification Parameter | Description | |
| 1 | Rated input voltage | 220-250VAC 50/60HZ | 6 | Switch Output | 5 relays 250VAC 2A | |
| 2 | Temperature Range | -40~100℃ | 7 | Relay load type |
D01:annunciator D02-D05: contactor or valve |
|
| 3 | Measurement Accuracy | 0.1℃@25℃ | 8 | Switch Input | 12 passive signal inputs | |
| 4 | Working Environment | -10℃~60℃,≤85%RH non-condensation | 9 | Analog Input | 1 NTC temperature sensor | |
| 5 | Storage Environment | -20℃~70℃,≤85%RH non-condensation | 10 | Current Input | 4 ways of current (0.3~35A) |
Panel Diagram
First Power-on
The controller needs to be configured when powered on for the first time. Please refer to 10.4 Configuration guide for specific operation.
Function Menu
Press the button on the main screen to enter the Function Menu, which includes five items as the table below:
| No. | Menu Item | Funtion | Remark | |
| 1 | User Settings | To display user parameters | For number of user parameters and their implications, please refer to: 9 User Parameters Table. | |
| 2 | Unit Status | To display the current operating status of the unit | Current value is not displayed when current module is not used. | |
| 3 | History List | Allowing the query of the last 10 faults | Press for 2s to clear the fault history. | |
| 4 | Comp run time | To display the cumulative operation time of the compressor | ||
| 5 | Version | To check the current software version | ||
User Parameters Table
| No. | Parameter Name | Factory Default | Setting Range | Remark |
| 1 | Lock T.set | No | Yes ~ No |
when locked. No: the set temperature can be modified on the main screen. |
| 2 | T.setpoint | 12.0℃ |
[T.setpoint min] ~[ T.setpoint max] |
Setting range is limited by the manufacturer parameters [T.setpoint max], [T.setpoint min]. (When the [TEMP Unit] is set “Fahrenheit”, the parameter is not displayed.) |
| 3 | T.setpoint | 53.6 ℉ |
[T.setpoint min] ~[ T.setpoint max] |
Setting range is limited by the manufacturer parameters [T.setpoint max], [T.setpoint min]. (When the [TEMP Unit] is set “Celsius”, the parameter is not displayed.) |
| 4 | TEMP Unit | Celsius | Celsius；Fahrenheit | |
| 5 | Contrast | 32 | 20~44 | Adjust the LCD contrast |
| 6 | On/Off type | Local | Local / Local + Remote / Remote |
Local: the unit can only start and stop locally. Local + Remote: the start and stop of the unit can be controlled both locally and remotely. Remote: the unit can only start and stop remotely. |
| 7 | Backlight On | 0 | 0~255 minute(s) | 0: backlight is not turned off. |
| 8 | Language | 中文 | 中文~English | Select the display language. |
| 9 | Comp Select | Two Comp | 1#Comp/2#Comp/Two Comp | Select the Comp to run. if select one comp the other does not work. The parameter is not listed for the single comp machine. |
Electrical Connection Diagram
Installation Dimensions
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.