High Density Tungsten Carbide Square Bar , Carbide Wear Parts 14.6-15.0 G/Cm3
High Density Tungsten Carbide Square Bar , Carbide Wear Parts 14.6-15.0 G/Cm3
K20 Tungsten Carbide strips blank High Wear Resistant Bars have high hard ness, wear-resistance, and resistance to bending,for cutting general wood or hard wood ,used for processing blades, wear resistance parts etc
| GSGrade | ISO Grade | Density (g/cm3) | Hardness (HRA) | T.R.S (MPα) | Grain Size | Performance & Application Recommended |
| RX10 | K20 | 14.6-15.0 | 90~90.5 | 2200~2400 | Medium | High hardness, suitable for roughing of iron, solid wood, dry wood or nonferrous metal, ceramic and other alloys. |
| RX20 | K30 | 14.6-15.0 | 90~90.5 | 2600~2800 | Fine | High toughness, easy to be brazed without heat preservation. Suitable for rosewood, solid wood, pinewood, and other wood with a lot stammer. |
| RX10T | K10 | 14.6-15.0 | 92.5~93 | 1800-2000 | Ultrafine | High hardness, suitable for finishing of iron, nonferrous metal, ceramic and other alloying, semifinishing of of hardwood, chipboard, MDF and HDF. Better to use silver soldering. |
| AB10 | K40 | 13.8-14.2 | 87.5~88 | 2800~3000 | Coarse | High toughness, difficult to break tooth. Special used for finger jointing tool. |
| TPYE | SPECIFICATION | ||
| T(mm) | W(mm) | L(mm) | |
| STB424 | 3.2 | 19.1 | 152.4 |
| STB428 | 3.2 | 22.2 | 152.4 |
| STB432 | 3.2 | 25.4 | 152.4 |
| STB436 | 3.2 | 28.7 | 152.4 |
| STB440 | 3.2 | 31.8 | 152.4 |
| STB448 | 3.2 | 38.1 | 152.4 |
| STB46 | 3.2 | 4.8 | 152.4 |
| STB48A | 3.2 | 6.4 | 25.4 |
| STB48B | 3.2 | 6.4 | 31.8 |
| STB48C | 3.2 | 6.4 | 57.2 |
| STB48D | 3.2 | 6.4 | 76.2 |
| STB48E | 3.2 | 6.4 | 152.4 |
| STB510 | 4.0 | 7.9 | 152.4 |
| STB512 | 4.0 | 9.5 | 152.4 |
| STB516 | 4.0 | 12.7 | 152.4 |
| STB520 | 4.0 | 15.9 | 152.4 |
| STB524 | 4.0 | 19.1 | 152.4 |
| STB528 | 4.0 | 22.2 | 152.4 |
| STB532 | 4.0 | 25.4 | 152.4 |
| STB536 | 4.0 | 28.7 | 152.4 |
| STB540 | 4.0 | 31.8 | 152.4 |
| STB610 | 4.8 | 7.9 | 152.4 |
| STB610A | 4.8 | 7.9 | 76.2 |
| STB612 | 4.8 | 9.5 | 152.4 |
| STB612A | 4.8 | 9.5 | 76.2 |
| STB616 | 4.8 | 12.7 | 152.4 |
| STB616A | 4.8 | 12.7 | 76.2 |
| STB620 | 4.8 | 15.9 | 152.4 |
| STB620A | 4.8 | 15.9 | 76.2 |
| STB624 | 4.8 | 19.1 | 152.4 |
| STB628 | 4.8 | 22.2 | 152.4 |
| STB632 | 4.8 | 25.4 | 152.4 |
| STB636 | 4.8 | 28.7 | 152.4 |
| STB640 | 4.8 | 31.8 | 152.4 |
| STB648 | 4.8 | 38.1 | 152.4 |
| STB68 | 4.8 | 6.4 | 152.4 |
| STB68A | 4.8 | 6.4 | 76.2 |
| STB812 | 6.4 | 9.5 | 152.4 |
| STB812A | 6.4 | 9.5 | 76.2 |
| STB816 | 6.4 | 12.7 | 152.4 |
| STB816A | 6.4 | 12.7 | 76.2 |
| STB820 | 6.4 | 15.9 | 152.4 |
| STB820A | 6.4 | 15.9 | 76.2 |
| STB824 | 6.4 | 19.1 | 152.4 |
| STB824A | 6.4 | 19.1 | 76.2 |
| STB828 | 6.4 | 22.2 | 152.4 |
| STB832 | 6.4 | 25.4 | 152.4 |
| STB836 | 6.4 | 28.7 | 152.4 |
| STB840 | 6.4 | 31.8 | 152.4 |
| STB848 | 6.4 | 38.1 |
152.4 |
Common specification sheet
| (T) | (W) | (L) |
| mm | mm | mm |
| 1~3 | 3.5 | 50~320 |
| 1~4 | 4 | 50~320 |
| 1~5 | 5 | 50~320 |
| 1~6 | 6 | 50~320 |
| 1~7 | 7 | 50~320 |
| 1~8 | 8 | 50~320 |
| 1~9 | 9 | 50~320 |
| 1~10 | 10 | 50~320 |
| 1~11 | 11 | 50~320 |
| 1~12 | 12 | 50~320 |
| 1~13 | 13 | 50~320 |
| 1~14 | 14 | 50~320 |
| 1~15 | 15 | 50~320 |
| 1~16 | 16 | 50~320 |
| 1~17 | 17 | 50~320 |
| 1~18 | 18 | 50~320 |
| 1~18 | 19 | 50~320 |
| 1~18 | 20 | 50~320 |
About Us
Zhuzhou Gold Sword Cemented Carbide Co., Ltd. located in Zhuzhou city, Hunan province, which is the largest cemented carbide production and sales base in China. Our main products are carbide strips, carbide STB bars, carbide sand breaking strips, carbide ASA brazing tips, carbide cold heading dies and carbide rods. Our professional and technical personnel all have above 15 years of cemented carbide production experience, the rich experience can provide our customers of high-quality products and thoughtful technical support, and continuous improvement to meet customer needs.
We has a complete carbide production line,we are manufacturer, so we can control the goods quality from raw material, production process, strictly quality inspection after finishing, also we have import and export license, we can export to our customers directly, our foreign trade manager have above 10 years carbide experience, can understand customer’s requirement well and correctly.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.