automatic PLC corrugated carton box printer slotter die cutter folder gluer binding machine

7. Other instructions:

Number of origin

1. Anilox roller, Jiangsu Haili 4

2. Rubber roller Jizhou 4

3. Bearing Humanistic, Wafangdian All

4. AC contactor, thermal relay, button Siemens All

5. Pneumatic diaphragm pump Desheng 4 sets

6. Die-cut rubber pads Spain All

7. Pneumatic solenoid directional valve Jinan Huaneng All

8, plc Taiwan and Delta 6

9. Touch screen Taiwan Delta 6

10. Inverter Taiwan Delta 2 sets

Acceptance Criteria

1. The seller guarantees that the machine sold is fully suitable for the post-forging process of A, B, C and E corrugated three-layer corrugated cardboard combined with five-layer corrugated cardboard. The weight of kraft paper is between 125 grams and 250 grams. The weight of corrugated paper exceeds demand between 112 grams and 180 grams.

2. Test conditions:

1. The quality of corrugated board is acceptable in the market, and its bending degree should not exceed the bending coefficient of 0.015 mm. This coefficient refers to the difference in the bending height of the cardboard when the cardboard width is 600 mm. The test cardboard can be based on this coefficient

The ratio is calculated based on the size, but the maximum bending cannot exceed 18 mm. E.g:

Cardboard width, bending height, high bending coefficient